On the front page is the contact information for getting the SRM corrected.
Which page? Which Figure? I will take a look at this when I can and add it to the next revision as needed.. Gerald On Wed, Apr 29, 2015 at 2:38 AM, Gergő Horváth <[email protected]> wrote: > Hi everyone! > > While developing an expansion board which houses an audio codec > interfacing through the audio expansion header i found out that the signals > are not on the pins they should be. Then i checked the gerbers and it seems > like the SRM of Beagleboard xM is not correct regarding the pinout of this > header. > > The SRM shows this pinout (bottom view): > _ > 3 1| > 4 2 > > But the the real pinout is this: > _ > 2 1| > 4 3 > > Can somebody verify this, and maybe correct the SRM? > > Regards > Gergő Horváth > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ http://circuitco.com/support/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
