Have you used a flash-img (like this: http://derekmolloy.ie/write-a-new-image-to-the-beaglebone-black/) by your test where you push the s2 button? It only works with a IMG that's designed for this.
You can read the script of derek molloy. He explain all the things very easy an helpfully. (Thanks Derek :-) ) Am Montag, 6. April 2015 07:06:37 UTC+2 schrieb milkyway: > > Hello everyone, > > I have been using my BBB without any problem for quite a long time. But, > suddenly the BBB stopped booting up from eMMC. When I connect the board via > USB, the power LED lits, and all the 4 user leds turns on for a few seconds > and goes off, except the LED_0, it is doing its heartbeat pattern. > > When I inserted a newly flashed SD card into its slot, and powered up, it > is turning on and booting up as usual. But, when I tried to flash the SD > card image into the eMMC by holding the boot-button during start up, only > the power LED turns on for 3 seconds and goes off, and nothing happens > thereafter. What could be the possible reason? How would I fix it? > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
