Dear all, I have a problem quite similar to this one: https://groups.google.com/forum/#!topic/beagleboard/qw5zlS4F4p4
This is my setup: a) a bleaglebone black with 5V on pin VDD_5V b) a C program doing a shutdown when the power button is pressed. I have the C program in my rc.local in such a way to have it running in background. If I have no ethernet cable connected and I try to push the power button, the beaglebone black goes down, the power led switches off but after 1 second the power led goes blue again and the beaglebone black restarts (1 second is often mentioned in the TPS65217 datasheet). If I have the ethernet cable connected and I try to push the power button, the beaglebone black goes down, the power led switches off and it does not start again. If I try to power the bleaglebone black by using the jack (and not using the VDD_5V pins), the beaglebone black does not start again (with or without ethernet cable). My beaglebone black should be a Rev.B. Any idea about this strange behaviour? Cheers. Alberto -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
