Ok, so the board we're using has an onboard eeprom I guess. Not sure this helps much for testing. I did not realize that it would auto configure its self. However, the output looks correct. Which are PGN's in the address column. It knocked the BB-CAN1 cape off it's slot. This is the only external can device we have currently. And the only "real" means which I can test on. As we have no CAN test equipment short of perhaps an oscilloscope.
Let me know if this helps at all Robert. [email protected]'s password: Last login: Mon May 11 20:23:49 2015 from 192.168.7.1 debian@beaglebone:~$ cat /sys/devices/platform/bone_capemgr/slots 0: 54:P---L cape-CBB-Serial,r01,Logic Supply,cape-CBB-Serial 1: 55:PF--- 2: 56:PF--- 3: 57:PF--- debian@beaglebone:~$ sudo ip link set can0 up type can bitrate 250000 debian@beaglebone:~$ sudo ifconfig can0 up debian@beaglebone:~$ sudo ifconfig can0 can0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 UP RUNNING NOARP MTU:16 Metric:1 RX packets:5131 errors:0 dropped:5131 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 RX bytes:37419 (36.5 KiB) TX bytes:0 (0.0 B) Interrupt:182 debian@beaglebone:~$ candump can0 can0 19F0C501 [8] 00 15 03 03 CE 68 00 00 ... On Tue, May 12, 2015 at 2:55 PM, Robert Nelson <[email protected]> wrote: > On Tue, May 12, 2015 at 4:38 PM, William Hermans <[email protected]> > wrote: > > OK, so nothing major then ? Just keyword change change is all. > > Yeap, just a keyword change. ;) > > Just got the 4dcape-43t working on my bbw. > > and i've added a blank (no eMMC/HDMI) beaglebone black target: > > dtb=am335x-boneblack-overlay.dtb * > > so now you can test the 4dcape-43t without using a beaglebone white.. > > I should have all the other lcd's working by tomorrow.. > > * starting with this build: > http://builds.beagleboard.org/builders/build-kernel/builds/27 > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
