On Mon, May 18, 2015 at 5:54 AM, <[email protected]> wrote: > Apologies for the late follow-up here. I’ve pretty much the same problem. > Using BR 2015.02 I get a sane looking set of outputs post build. > > u-boot spew follows. > > Both mmc 0:1 and mmc 0:2 show the expected SD card content. It just looks > like uEnv is wrong (?). > > Any help here would be much appreciated. TVMIA > > -----------------------snip---------------------------------------- > micro SD card found > mmc0 is current device > gpio: pin 54 (gpio 54) value is 1 > SD/MMC found on device 0 > reading uEnv.txt > 96 bytes read in 3 ms (31.3 KiB/s) > Loaded environment from uEnv.txt > Importing environment from mmc ... > Running uenvcmd ... > ## Error: "loadimage" not defined > reading ramdisk.gz > ** Unable to read file ramdisk.gz ** > reading /am335x-boneblack.dtb > 34004 bytes read in 9 ms (3.6 MiB/s) > Booting from ramdisk ... > Wrong Image Format for bootm command > ERROR: can't get kernel image!
Yuck! bootm!! > gpio: pin 55 (gpio 55) value is 1 > reading /uImage > ** Unable to read file /uImage ** > U-Boot# > -----------------------snip--------------------------------------- You have a really old bootloader in eMMC.. Robert's original post assumes at-least the Debian May 2014 release or newer stored in eMMC.. http://beagleboard.org/latest-images Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
