go to: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Debian_Releases
Scroll down to: BBB (All Revs) eMMC Flashers Then pick your poison. LXDE or console. On Mon, May 18, 2015 at 6:50 PM, William Hermans <[email protected]> wrote: > *Which board do you have, and which image are you trying to flash ?* >> > > Never mind that question. You have either and A5A or an REVB based on the > distro you mentioned "Angstrom". > > Make sure you're not trying to use a REVC 4GB image. It should be marked > on the ewiki page. > > On Mon, May 18, 2015 at 6:43 PM, William Hermans <[email protected]> > wrote: > >> copy / paste with putty is: >> >> 1) Select the text you wish to copy with the mouse. >> 2) left click the selection. >> >> Be careful not to right click in the putty window when you have something >> in the clipboard, as this will put whatever is in the clipboard into the >> prompt, and putty will process return + newlines as if you pressed <enter> >> on the keyboard . . . depending on what you have in the clipboard this can >> be dangerous. >> >> Which board do you have, and which image are you trying to flash ? >> >> On Mon, May 18, 2015 at 6:25 PM, Jack Fisher <[email protected]> wrote: >> >>> Getting a "not enough memory on device (28)" message repeatedly at the >>> end when it switches from cylon flashing to fast double flash. I was >>> surveilling through the 3.3 FTDI cable, hopefully the observation was not >>> the root of the problem. I will try one more time without the FTDI cable >>> and see if it makes a difference, then I suppose I will try to re-download >>> the flasher image and re-unpack it... >>> >>> I would have included more of the output than this dim recollection, but >>> Putty does not seem to support select and copy... >>> >>> Any better suggestions? >>> >>> I guess I can get the board working with an SD boot system rather than >>> flashing the EMMC, but that doesn't really get me where I want to and >>> should be able to go, >>> >>> Regards and thanks in advance, >>> >>> Jack >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
