Hi Robert Nelson, I'm trying to use this u-boot on an other Debian Image. But I couldn't find the NTFS partition, there is only the rootfs partition. ( I don't have emmc on my board, so i can't use the bootloader from the emmc ).
Could u tell me which image should I take ? kernel 3.8 or 4.1 ? The kernel 4.1 looks interesting, is it stable enough ? ( I don't need the cape manager ). Thx for the answer, ---------- Forwarded message --------- From: Robert Nelson <[email protected]> Date: mer. 6 mai 2015 à 21:48 Subject: Re: [beagleboard] nand-flash-writer & clone of BeagleBoneBlack To: Beagle Board <[email protected]> On Wed, May 6, 2015 at 2:36 PM, Micka <[email protected]> wrote: > It's almost a 100% clone, expect that we removed the eMMC. Normally this > shouldn't be a problem Because I've disabled the eMMC in a config file. > > so far : > UART 1 working, > user led working, > I2C 0 working ( because i'm able to read the EEPROM with Code Composer > studio + BoardInfoRead function in the eeprom.c https://github.com/RobertCNelson/Bootloader-Builder/blob/master/patches/v2015.04/0002-NFM-Production-eeprom-assume-device-is-BeagleBone-Bl.patch Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
