Hi guys, I am facing the same problem (power LED on, user LED off and board not booting).
It only happens occasionally. I wrote a script that reboots the board every 60s (using "shutdown -r now") to reproduce. I then installed the "MLO" and "u-boot.img" files that are available in "https://www.dropbox.com/sh/98xacnk466xfpza/uTlii1hrsg"; but the problem still happens occasionally. I am not sure though I installed "MLO" and "u-boot.img" correctly - exactly which folder do these files have to be copied into? I found existing "MLO" and "u-boot.img"files in "/opt/backup/uboot" so I copied the new files to that location. Or do I have to copy them to "/boot/uboot" instead? Sorry if this seems to be a silly question - I am still quite new to the BBB and have been struggling with several issues. This issue is one of them; eth0 occasionally not connecting after reboot if static IP settings is another one (but that will be a separate post). Thanks for all help; I am a bit in a desperate situation as my system (based on BBB) will be installed in an unattended environment where power failures are possible - so it is crucial that the boot rate is 100.00%! Regards Ivan -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
