On Wed, Jun 3, 2015 at 6:16 PM, Jason Kridner <[email protected]> wrote:
> All interested in http://campaign.circuithub.com/beaglebone-gamingcape,
>
> I'm trying to make sure the kernel and software image are suitable for
> giving the green light to CircuitHub to start shipping the Gaming
> Capes.  I wanted to give people a chance to give some feedback on what
> ideally should be done, save off some notes on my current
> progress---and enable you to try it out if you happen to have built
> one of these capes.
>
> I've been starting by patching up the 3.8 kernel
> (firmware/capes/BEAGLEBOY-0013.dts):
>
> http://builds.beagleboard.org/builders/build-kernel/builds/45
>
> On-going work on the install instructions are at:
>
> https://github.com/jadonk/gamingcape/blob/master/software/install.sh
>
> If the EEPROM isn't programmed, you'll need to short the WP line to
> ground and run:
>
> https://github.com/jadonk/gamingcape/blob/master/software/write_eeprom.sh
>
> What I haven't yet worked out, but am looking at resolving are:
>
> * adding a joystick driver for the joystick (not just analog values)
>    --- my current thoughts are either using /dev/uinput and a
> userspace application or
>    --- modifying the input/joystick/analog.c driver to use device tree
> and ADC converters
> * get the mouse working under X11 using the joystick and buttons
>    --- I've hacked on xorg.conf files to get xserver-xorg-input-evdev
> drivers loaded, but I don't seem to be seeing the the "mouse" clicks
> (/var/log/Xorg.0.log - http://paste.debian.net/198458/)

xserver-xorg-input-joystick should be able to handle this..

It allows a bunch of customization:

http://www.x.org/releases/X11R7.7/doc/man/man4/joystick.4.xhtml

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to