Hi! I'm running Debian on a BBB with Kernel 3.8. I'm going to use the Nh5cape for the BBB. So I have followed the tutorial <http://elinux.org/Nh5capeSoftware> (the section: Build Kernel - Kernel 3.8) to rebuild my kernel with the touchscreen drivers included (Another intention was to replace the kernel-buildin bootlogo. I have replaced the original *logo_linux_clut224.ppm* with mine). First I thought that is all to do (because the page doesn't tell there is anything more to do), but obviously the script of RobertCNelson only puts the recompiled files into the "deploy" dir. I'm a newbie for Linux and embedded systems. So can you please tell me what I have to do with these files to replace my actual kernel with the new one?
Those files I have there: - 3.8.13-bone71.2.zImage - 3.8.13-bone71.2-dtbs.tar.gz - 3.8.13-bone71.2-firmware.tar.gz - 3.8.13-bone71.2-modules.tar.gz - config-3.8.13-bone71.2 - linux-firmware-image-3.8.13-bone71.2_1cross_armhf.deb - linux-headers-3.8.13-bone71.2_1cross_armhf.deb - linux-image-3.8.13-bone71.2_1cross_armhf.deb - linux-libc-dev_1cross_armhf.deb - uImage Thanks in advance! Christoph -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
