Yes, tty0 now identifies as ttyGS0. After fighting it for several hours, I went to lunch. When I return, the problem has disappeared, is no longer reproducible, and everything is working fine. I didn't knowingly do anything to fix it. So, I guess disregard the BugReport.
Anyway, in the future, I will try having more lunches when problems occur. --- Graham == On Sunday, June 7, 2015 at 5:55:54 PM UTC-5, William Hermans wrote: > > tty0 should be ttyS0 now I believe. Where this is changed with images > using systemd I am not sure, but with SYSV this was changed in /etc/inittab. > > On Sun, Jun 7, 2015 at 1:10 PM, Graham <gra...@flex-radio.com > <javascript:>> wrote: > >> BBB-eMMC-flasher-debian-8.0-console-armhf-2015-05-31-2gb.img >> does the same thing. >> >> == >> >> On Sunday, June 7, 2015 at 2:59:01 PM UTC-5, Graham wrote: >>> >>> >>> >>> REGARDING: bone-debian-8.0-console-armhf-2015-05-31-2gb.img >>> BUG: Does not respond to inputs on serial port tty0 after boot. >>> >>> Note: >>> bone-debian-8.0-lxqt-4gb-armhf-2015-05-31-4gb.img does not have this >>> problem. >>> bone-debian-8.0-console-armhf-2015-05-17-2gb.img does not have this >>> problem. >>> >>> >>> >>> serial port tty0 boot log (partial): >>> >>> [ OK ] Started System Logging Service. >>> [ OK ] Started Login Service. >>> Starting Getty on tty1... >>> [ OK ] Started Getty on tty1. >>> Starting Serial Getty on ttyS0... >>> [ OK ] Started Serial Getty on ttyS0. >>> [ 17.050606] musb-hdrc musb-hdrc.0.auto: otg: usb_otg_register_gadget: >>> device not registered to otg core >>> [ OK ] Found device /dev/ttyGS0. >>> Starting Serial Getty on ttyGS0... >>> [ OK ] Started Serial Getty on ttyGS0. >>> [ OK ] Reached target Login Prompts. >>> [ OK ] Started Generic Board Startup. >>> [ OK ] Reached target Multi-User System. >>> [ OK ] Reached target Graphical Interface. >>> Starting Update UTMP about System Runlevel Changes... >>> [ OK ] Started Update UTMP about System Runlevel Changes. >>> >>> Debian GNU/Linux 8 beaglebone ttyS0 >>> >>> BeagleBoard.org Debian Image 2015-05-31 >>> >>> Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian >>> >>> default username:password is [debian:temppwd] >>> >>> The IP Address for eth0 is: 192.168.1.200 >>> beaglebone login: >>> >>> >>> ================================================================================ >>> At this point, the unit does not respond to any input on the tty0 >>> serial port. However I can SSH into the unit just >>> fine ... >>> ====== >>> >>> login as: root >>> Debian GNU/Linux 8 >>> >>> BeagleBoard.org Debian Image 2015-05-31 >>> >>> Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian >>> >>> default username:password is [debian:temppwd] >>> >>> Last login: Sun Jun 7 19:18:12 2015 from dt7100-pc >>> root@beaglebone:~# uname -a >>> Linux beaglebone 3.14.43-ti-r66 #1 SMP PREEMPT Fri May 22 22:31:38 UTC >>> 2015 armv7l GNU/Linux >>> root@beaglebone:~# >>> >>> >>> >>> ===== >>> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard...@googlegroups.com <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.