do what i did design the board to have the beagle be upside down on your board creating another BBB without headers is another headache for gerald
On 6/15/2015 11:57 AM, Jeff Albrecht wrote: > Is it possible to purchase a BBB without the P8/P9 headers soldered in? > > I'd like to have a BBB with stacking headers so that I could plug the > BBB into headers on a board I'm prototyping. That is the BBB would > look the same from the top with P8 and P9 available for a cape or > wires... AND have pins sticking through the bottom to plug into a > board below. With the normal BBB top up and the protruding pins in my > prototype board. Or perhaps someone sells BBBs in my desired > configuration? > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] > <mailto:[email protected]>. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
