I cannot tell from here if it is dead or not. You would need to get it looked at. The Power LED is not supposed to blink at all, it should be solid on, You might try looking closely at it when you plug in your cable. If it flashes on briefly, then the board needs to be repaired.
It could also be a case of your PC/Laptop/??? detecting an over current on the USB port. You might try using another USB port. Gerald On Thu, Jun 18, 2015 at 4:59 PM, <[email protected]> wrote: > Hi, > > Few days ago bought BB black. Everything went till now. It been just > powered up with usb cable, and I've been doing nothing with it. Then it > accidentally switched off. Now it is not working at all, not even power led > blinking. Disappointingly I don't have 5v cable to power it up without pc, > so I can't check if it is a problem with usb or not. Can anyone please > explain to me what is wrong with it and is it dead or not. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
