Life is good. Sorry about not specifying it was a console only image.
Thanks for help on this one and all your great work on these releases.
Ross
On 06/30/2015 03:36 PM, Robert Nelson wrote:
On Tue, Jun 30, 2015 at 5:28 PM, Ross Morrison <[email protected]> wrote:
Yea, I had caught that mistake on the cape_enable line. That is taken care
of.
Here is the complete /boot/uEnv.txt.
=======================
root@bbb-blackbox:~# cat /boot/uEnv.txt
#Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0
uname_r=4.1.0-bone9
#dtb=
##BeagleBone Black dtb's for v4.1.x (BeagleBone White just works..)
##HDMI/eMMC disabled:
#dtb=am335x-boneblack-overlay.dtb
##cape-universal
#dtb=am335x-boneblack-universal.dtb
##wl1835
#dtb=am335x-boneblack-wl1835mod.dtb
##replicape
#dtb=am335x-boneblack-replicape.dtb
cmdline=coherent_pool=1M quiet
#In the event of edid real failures, uncomment this next line:
#cmdline=coherent_pool=1M quiet video=HDMI-A-1:1024x768@60e
##Example v3.8.x
#cape_disable=capemgr.disable_partno=
#cape_enable=capemgr.enable_partno=
##Example v4.1.x
#cape_disable=bone_capemgr.disable_partno=
#cape_enable=bone_capemgr.enable_partno=
#Disable HDMI/eMMC
cape_disable=bone_capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN,BB-BONE-EMMC-2G
Disable this line ^ as
"BB-BONELT-HDMI,BB-BONELT-HDMIN,BB-BONE-EMMC-2G" is NOT enabled in
v4.1.x, if you want hdmi/eMMC disabled use
dtb=am335x-boneblack-overlay.dtb
cape_enable=bone_capemgr.enable_partno=BB-UART4
##Disable HDMI
#cape_disable=capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN
##Disable eMMC
#cape_disable=capemgr.disable_partno=BB-BONE-EMMC-2G
##Audio Cape (needs HDMI Audio disabled)
#cape_disable=capemgr.disable_partno=BB-BONELT-HDMI
#cape_enable=capemgr.enable_partno=BB-BONE-AUDI-02
##enable BBB: eMMC Flasher:
##make sure, these tools are installed: dosfstools rsync
#cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
root@bbb-blackbox:~#
=======================
here are some greps from dmesg
===========================
root@bbb-blackbox:~# dmesg | grep UART
[ 0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8
bone_capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN,BB-BONE-EMMC-2G
bone_capemgr.enable_partno=BB-UART4 root=/dev/mmcblk0p1 rootfstype=ext4
rootwait fixrtc coherent_pool=1M quiet
[ 3.054227] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 154,
base_baud = 3000000) is a OMAP UART0
[ 3.468496] bone_capemgr bone_capemgr: enabled_partno PARTNO 'BB-UART4'
VER 'N/A' PR '0'
[ 3.468534] bone_capemgr bone_capemgr: slot #4: 'Override Board
Name,00A0,Override Manuf,BB-UART4'
[ 4.472472] bone_capemgr bone_capemgr: loader: failed to load slot-4
BB-UART4:00A0 (prio 0)
root@bbb-blackbox:~#
root@bbb-blackbox:~# dmesg | grep cape
[ 0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8
bone_capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN,BB-BONE-EMMC-2G
bone_capemgr.enable_partno=BB-UART4 root=/dev/mmcblk0p1 rootfstype=ext4
rootwait fixrtc coherent_pool=1M quiet
[ 3.222538] bone_capemgr bone_capemgr: Baseboard:
'A335BNLT,00C0,3214BBBK1283'
[ 3.222565] bone_capemgr bone_capemgr:
compatible-baseboard=ti,beaglebone-black - #slots=4
[ 3.282380] bone_capemgr bone_capemgr: slot #0: No cape found
[ 3.342488] bone_capemgr bone_capemgr: slot #1: No cape found
[ 3.402388] bone_capemgr bone_capemgr: slot #2: No cape found
[ 3.462435] bone_capemgr bone_capemgr: slot #3: No cape found
[ 3.468496] bone_capemgr bone_capemgr: enabled_partno PARTNO 'BB-UART4'
VER 'N/A' PR '0'
[ 3.468507] bone_capemgr bone_capemgr: slot #4: override
[ 3.468520] bone_capemgr bone_capemgr: Using override eeprom data at slot
4
[ 3.468534] bone_capemgr bone_capemgr: slot #4: 'Override Board
Name,00A0,Override Manuf,BB-UART4'
[ 3.468779] bone_capemgr bone_capemgr: initialized OK.
[ 4.472472] bone_capemgr bone_capemgr: loader: failed to load slot-4
BB-UART4:00A0 (prio 0)
root@bbb-blackbox:~#
root@bbb-blackbox:~# dmesg | grep uart
[ 3.054068] omap_uart 44e09000.serial: no wakeirq for uart0
root@bbb-blackbox:~#
===========================
This was the console image
microSD/Standalone: (console) (BeagleBone/BeagleBone Black)
wgethttps://rcn-ee.com/rootfs/bb.org/testing/2015-06-29/console/bone-debian-8.1-console-armhf-2015-06-29-2gb.img.xz
md5sum: 34d877d57c57ff1d6bc27685ea88b42f
ah "console" lead with that next time.. Only the lxqt images have
"everything" ready to go..
sudo apt-get update ; sudo apt-get install git-core
git clone https://github.com/beagleboard/bb.org-overlays
cd bb.org-overlays
./dtc-overlay.sh
./install.sh
sudo reboot
Regards,
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
