On Wed, Jul 1, 2015 at 12:09 PM, Robert Nelson <[email protected]> wrote: > On Wed, Jul 1, 2015 at 12:06 PM, <[email protected]> wrote: >> Hi, >> >> I have created SD card images from the June 29th debian 8.1 images for both >> console and lxqt. >> >> With the lxqt image I was successfully getting a linux machine to create an >> new interface eth1with address 192.168.7.1 when USB was connected. >> >> I know that the console image is stripped down and that in the March 2015 >> image it was necessary to install udhcpd and then update to the latest >> boot-scripts to get it to work. >> I tried this on the 29th June console image but with no success. The >> boot-scripts were actually at the latest version when I did git pull. >> >> Is there another component missing in the Debian 8.1 console image? > > Actually anything after June 16 has udhcpd installed by default for > the console image.... > > https://github.com/RobertCNelson/omap-image-builder/commit/1b2d8ece564f5fb708e8139ee40db05691cc3e03 > > I'll dl and check, as something is going on..
So on the bbb: (journalctl -f) Jun 29 07:36:23 beaglebone sh[275]: generic-board-startup: [startup script=/opt/scripts/boot/am335x_evm.sh] Jun 29 07:36:24 beaglebone kernel: using random self ethernet address Jun 29 07:36:24 beaglebone kernel: using random host ethernet address Jun 29 07:36:24 beaglebone kernel: using host ethernet address: 54:4A:16:BB:AE:0B Jun 29 07:36:24 beaglebone kernel: using self ethernet address: 54:4A:16:BB:AE:00 Jun 29 07:36:24 beaglebone kernel: usb0: HOST MAC 54:4a:16:bb:ae:0b Jun 29 07:36:24 beaglebone kernel: usb0: MAC 54:4a:16:bb:ae:00 Jun 29 07:36:24 beaglebone kernel: using random self ethernet address Jun 29 07:36:24 beaglebone kernel: using random host ethernet address Jun 29 07:36:24 beaglebone kernel: g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 Jun 29 07:36:24 beaglebone kernel: g_ether gadget: g_ether ready Jun 29 07:36:24 beaglebone kernel: g_ether gadget: high-speed config #1: CDC Ethernet (ECM) on the x86: [14634.248639] usb 1-1.2: new high-speed USB device number 4 using ehci-pci [14634.341396] usb 1-1.2: New USB device found, idVendor=0525, idProduct=a4a2 [14634.341403] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [14634.341407] usb 1-1.2: Product: BeagleBoneBlack [14634.341410] usb 1-1.2: Manufacturer: Circuitco [14634.341413] usb 1-1.2: SerialNumber: 0C-000C2115BBBK [14634.409956] cdc_subset: probe of 1-1.2:1.0 failed with error -22 [14634.410766] cdc_subset 1-1.2:1.1 usb0: register 'cdc_subset' at usb-0000:00:12.2-1.2, Linux Device, aa:a0:be:c6:fb:91 [14634.410936] usbcore: registered new interface driver cdc_subset [14634.416672] cdc_ether: probe of 1-1.2:1.0 failed with error -16 [14634.416714] usbcore: registered new interface driver cdc_ether [14634.424461] cdc_subset 1-1.2:1.1 usb0: kevent 12 may have been dropped Other then my usb3.0 hub acting up again and dropping the connection everything seems to be in spec.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
