ooopps Focused on the aftermath and not the error. Anyhow g4 which rootfs are you using ? I was just reading a bug report for sid last year that indicates that the error:
***] A start job is running for LSB: Raise network interf...28s / no limit) can be related to systemd-sysv trying to use / load a resource ( $network ) which is not available. With that said, it is odd that one image works while the other two do not. Unless they all work fine one at a time . . . Then I'm still leaning towards limited bandwidth or somehow a server misconfiguration. On Wed, Jul 8, 2015 at 1:10 PM, William Hermans <[email protected]> wrote: > Also, this seems to be a decent "guide" to help you troubleshoot. > > https://access.redhat.com/solutions/28211 It's redhat, but Linux is Linux > so long as there are not any redhat-isms. > > On Wed, Jul 8, 2015 at 12:44 PM, William Hermans <[email protected]> > wrote: > >> Yeap, take the one that does boot out of the loop. Then try booting the >> other two. If the first to boot works. Then you have a problem with your >> configuration, or possibly network. >> >> Are you using GbE + GbE switch between the server, and the bones ? >> >> On Wed, Jul 8, 2015 at 12:18 PM, <[email protected]> wrote: >> >>> 3 B3s all same rev all running 4.1.0-bone9 configured identically to >>> boot via TFTP/NFS (not all at the same time I hasten to add). 1 machine >>> works perfectly. The other 2 both reach the same point then hang. Any >>> thoughts? >>> >>> >>> >>> TAIA >>> >>> >>> >>> [ 0.000000] Booting Linux on physical CPU 0x0 >>> >>> [ 0.000000] Initializing cgroup subsys cpuset >>> >>> [ 0.000000] Initializing cgroup subsys cpu >>> >>> [ 0.000000] Initializing cgroup subsys cpuacct >>> >>> [ 0.000000] Linux version 4.1.0-bone9 (jevans@acermint) (gcc version >>> 4.9.3 20141031 (prerelease) (Linaro GCC 2014.11) ) #1 Wed Jul 1 13:31:10 >>> BST 2015 >>> >>> [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), >>> cr=50c5387d >>> >>> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing >>> instruction cache >>> >>> [ 0.000000] Machine model: TI AM335x BeagleBone Black >>> >>> [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 >>> >>> [ 0.000000] Memory policy: Data cache writeback >>> >>> [ 0.000000] CPU: All CPU(s) started in SVC mode. >>> >>> [ 0.000000] AM335X ES2.0 (sgx neon ) >>> >>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. >>> Total pages: 129920 >>> >>> [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/nfs >>> rw rootfstype=ext4 rootwait fixrtc >>> nfsroot=192.168.1.110:/home/bone/rootfs,vers=3 >>> ip=192.168.1.11:192.168.1.110:192.168.1.254:255.255.255.0::eth0:off >>> >>> xxx--------elided-------------xxx >>> >>> [ OK ] Started Trigger Flushing of Journal to Persistent Storage. >>> >>> [ OK ] Started LSB: Tune IDE hard disks. >>> >>> [ OK ] Started Create Volatile Files and Directories. >>> >>> Starting Network Time Synchronization... >>> >>> Starting Update UTMP about System Boot/Shutdown... >>> >>> [ OK ] Started Update UTMP about System Boot/Shutdown. >>> >>> [ OK ] Started Network Time Synchronization. >>> >>> [ OK ] Reached target System Time Synchronized. >>> >>> [ OK ] Found device /dev/ttyO0. >>> >>> [ 12.709682] omap_rng 48310000.rng: OMAP Random Number Generator ver. >>> 20 >>> >>> [ 12.966802] tda998x 0-0070: found TDA19988 >>> >>> [ 12.997206] [drm] Supports vblank timestamp caching Rev 2 >>> (21.10.2013). >>> >>> [ 13.004323] [drm] No driver support for vblank timestamp query. >>> >>> [ 13.070366] tilcdc 4830e000.lcdc: No connectors reported connected >>> with modes >>> >>> [ 13.134136] [drm] Cannot find any crtc or sizes - going 1024x768 >>> >>> [ 13.214789] Console: switching to colour frame buffer device 128x48 >>> >>> [ 13.227549] tilcdc 4830e000.lcdc: fb0: frame buffer device >>> >>> [ 13.233424] tilcdc 4830e000.lcdc: registered panic notifier >>> >>> [ 13.339779] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0 >>> >>> [ 13.376166] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 >>> >>> [ 13.432581] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 >>> >>> [ ***] A start job is running for LSB: Raise network interf...28s / no >>> limit)[ 44.972386] nfs: server 192.168.1.110 not responding, still trying >>> >>> >>> >>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
