According to this: http://stackoverflow.com/questions/12646324/how-to-set-a-custom-baud-rate-on-linux
*You can set custom baud rate using stty command on linux. For example, to set custom baud rate of 567890 on your serial port /dev/ttyX0 use the command* *stty -F /dev/ttyX0 567890* This may / may not work. But possibly worth a try. The first answer may also work but I've never done this in linux, so could not say for sure. On Thu, Jul 9, 2015 at 10:22 AM, Harvey White <[email protected]> wrote: > On Thu, 9 Jul 2015 09:39:28 -0700 (PDT), you wrote: > > >The pump has closed protocol and communicates via current loop, use a > >serial loop converter to communicate. I have an application that works > that > >way with several pumps market the only problem with this is the BAUDRATE. > >Does anyone know how to configure the serial port to work with BAUDRATE of > >5760? This is my only doubt. > > 5760 is not standard... could it be 57600? > > Otherwise there is a baudrate register that must be adjusted. > > Harvey > > > > >Em quinta-feira, 9 de julho de 2015 12:13:15 UTC-3, Wulf Man escreveu: > >> > >> paste a link to this fuel pump > >> > >> > >> On 7/9/2015 7:57 AM, Marlon Cesar Pilonetto wrote: > >> > >> The baud rate the fuel pump uses is 5760 and I am unable to > communicate with her through my application. The same application on fuel > pumps with baud rate 9600 works perfectly . > >> > >> > >> Em quarta-feira, 8 de julho de 2015 14:23:33 UTC-3, Wulf Man escreveu: > >>> > >>> Standard baud rates supported by most serial ports: > >>> 110 > >>> 300 > >>> 600 > >>> 1200 > >>> 2400 > >>> 4800 > >>> 9600 > >>> 14400 > >>> 19200 > >>> 28800 > >>> 38400 > >>> 56000 > >>> 57600 > >>> 115200 > >>> > >>> Standard baud rates supported by some serial ports: > >>> 128000 > >>> 153600 > >>> 230400 > >>> 256000 > >>> 460800 > >>> 921600 > >>> > >>> is your baud rate somewhere in this chart ? > >>> > >>> > >>> > >>> On 7/8/2015 7:20 AM, [email protected] wrote: > >>> > >>> Hello, > >>> > >>> Excuse my lack of knowledge on the subject as it is the first time I > am > >>> working with BEAGLEBONE. So I'm trying to communicate with a fuel pump > that > >>> has a BaudRate of 5760'm using node js in my application. However I > can not > >>> even configure the serial port with this BaudRate, can anyone help me > with > >>> this please. > >>> -- > >>> For more options, visit http://beagleboard.org/discuss > >>> --- > >>> You received this message because you are subscribed to the Google > Groups > >>> "BeagleBoard" group. > >>> To unsubscribe from this group and stop receiving emails from it, send > an > >>> email to [email protected]. > >>> For more options, visit https://groups.google.com/d/optout. > >>> > >>> > >>> -- > >> For more options, visit http://beagleboard.org/discuss > >> --- > >> You received this message because you are subscribed to the Google > Groups > >> "BeagleBoard" group. > >> To unsubscribe from this group and stop receiving emails from it, send > an > >> email to [email protected] <javascript:>. > >> For more options, visit https://groups.google.com/d/optout. > >> > >> > >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
