David, Yes, others have experienced this problem. As I've seen a few post on similar subject over the past couple years. While I can not say 100% what will fix this issue for you, most of the posts I remember seeing seemed to be with reversed, or swapped colors.
So without remembering the exact details of every post. What I can do is perhaps help you, help yourself. If you go into the beagleboard.org google group, and refine your search by date. You should be able to find the posts I'm talking about. What exact keywords to search for . . . well that you'll have ot experiment with. Color will definitely be one of them. . . On Fri, Jul 10, 2015 at 1:28 PM, David Alston <[email protected]> wrote: > I still have the same problem after adding that into xorg.conf. Putting > the process I used here in case I screwed up: > > sudo nano /etc/X11/xorg.conf > > Then I made the changes and saved (Ctrl O) then exited (Ctrl X) > > Then rebooted. I went to the desktop with no issues, but the color problem > persists. > > > On Friday, July 10, 2015 at 4:16:23 PM UTC-4, Sean S wrote: >> >> You're right, it is to do with 16 vs 24 bit colour, see >> https://groups.google.com/d/topic/beagleboard/PjKwp6XCNnA/discussion for >> a fix that worked for me. >> >> On Friday, July 10, 2015 at 12:09:36 PM UTC-7, David Alston wrote: >>> >>> I have been having issues with my beaglebone black when connecting to a >>> monitor over HDMI. Certain colors are missing from the output as shown in >>> the attached images. From looking around it may be an issue with the sitara >>> processor on the BB, possibly having to do with 16 vs 24 bit color. However >>> I could not get a workaround form what I have come across. Has anyone else >>> had similar problems? Ideas for a fix or solution? Any help would be >>> greatly appreciated. >>> >>> FullSizeRender is the test image on a windows machine, FullSizeRender2 >>> is as it appears on the BB using Imagemagick. >>> >>> Let me know if more information is required. >>> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
