On Fri, Jul 17, 2015 at 7:53 PM, Sherman Boyd <[email protected]> wrote: > I changed bootargs to: > > setenv bootargs 'console=ttyO0,115200n8 quiet root=/dev/nfs > nfsroot=162.218.156.29:/tftpboot/root/one rw > ip=192.168.0.2:162.218.156.29:192.168.0.1:255.255.255.0:one:eth0:off' > > the salient difference being 'rw' after nfsroot and adding /tftpboot to the > path and it's booting now, although the fsck check fails: > > INIT: version 2.88 booting > [info] Using makefile-style concurrent boot in runlevel S. > findfs: unable to resolve 'UUID=44c824c2-262c-4b4f-8d31-c9b5aec1eed2' > [ ok ] Starting the hotplug events dispatcher: udevd. > [ ok ] Synthesizing the initial hotplug events...done. > [ ok ] Waiting for /dev to be fully populated...done. > findfs: unable to resolve 'UUID=44c824c2-262c-4b4f-8d31-c9b5aec1eed2' > [ ok ] Activating swap...done. > Usage: mountpoint [-q] [-d] [-x] path > [....] Checking root file system...fsck from util-linux 2.20.1 > fsck.ext4: No such device or address while trying to open /run/rootdev > Possibly non-existent or swap device? > fsck died with exit status 8 > failed (code 8). > [....] An automatic file system check (fsck) of the root filesystem failed. > A manual fsck must be performed, then the system restarted. The fsck should > be performed in maintenance mo[FAILth the root filesystem mounted in > read-only mode. ... failed! > [....] The root filesystem is currently mounted in read-only mode. A > maintenance shell will now be started. After performing system maintenance, > press CONTROL-D to terminate the main[warnce shell and restart the system. > ... (warning). > Give root password for maintenance > (or type Control-D to continue):
Clean out your /etc/fstab.. Then only thing you need in their when doing nfs root. is: debugfs /sys/kernel/debug debugfs defaults 0 0 > When you say say drop initrd, you mean?: > > tftp 0x81600000 /boot/one/initrd.img-3.8.13-bone70 > > When I don't load that bootz gives me a corrupt image error. I probably > don't understand the bootz command, I've been looking for documention on it > and haven't found any. I tried > > bootz 0x80300000 0x815f0000 Just replace the initrd address with a "-" bootz zImage initrd ftd -> bootz zImage - ftd Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
