@kantonus I must admit, I have never attempted to set this up myself. But I do have lots of experience with Samba. The symptom you describe above sounds like a very likely samba misconfiguration. But again . . . I've no hands on with your situation . . .
On Sat, Jul 18, 2015 at 6:51 AM, <[email protected]> wrote: > Hello Yves, > It is nice to know that it is really possible to make this setup work. I > have struggled with this quite some time without success. My BBB runs > Ubuntu 12.04 and CUPS 1.5.3 and I can log into its web site and add > printers and printer drivers. All is fine - but - I just cannot print. > Printing on a client returns something about waiting for authentication, > and printing from the console of the BBB returns "lp: Not allowed to print." > I have searched and followed various recipes without success. And I have a > feeling that my cups.conf is still not 100% correct. I wonder if you might > have some hint up your sleeve - maybe a working sample cups.conf that I > could use to test on or something else that can get me out of the swamp. > > Cheers > Gunnar > > Den onsdag den 5. marts 2014 kl. 19.42.24 UTC+1 skrev Yves Grignon: >> >> I will try to help but I did this some time ago and being an old man, >> my memory is failing me. >> >> Using CUPS I can print to my HPLJ printer from my BBB but not from >> Windows. Windows seems to need a driver to print to a networked printer >> and it does not have one for the HPLJ 1012. A friend had no problem >> printing from an iPad. >> >> I installed CUPS probably with apt-get install. I have CUPS version >> 1.6.2. I also installed hplip. I plugged my HPLJ 1012 into a USB port and >> did lsusb. It listed "Bus 001 Device 005: ID 03f0:0d17 Hewlett-Packard >> LaserJet 1012". From my Windows PC, using Chrome, I connected to CUPS on >> my BBB with http://bbb:631 where bbb is my BBB and 631 is the port used >> by CUPS. From there it's easy. I just did Add printer and my HPLJ 1012 >> was listed so I selected it. I selected "HP LaserJet 1012 - >> CUPS+Gutenprint v5.2.9". I can print from the console on bbb with lp >> file. >> >> If your printer is connected via USB, you probably need some driver for >> it. When it is plugged in, try lsusb. If it is not listed, try to find a >> driver for Ubuntu and ARM. >> >> Good luck >> Yves >> >> *From:* Chintan Kapadia >> *Sent:* Wednesday, March 05, 2014 12:14 AM >> *To:* [email protected] >> *Subject:* Re: [beagleboard] Re: BBB is a great home server but printing >> is a challenge >> >> Hello, thnx for communicate, >> using CUPS are u able to print some other printer...? (if avoid >> this two..) >> because I was try to communicate printer canon mf4450. but not >> get succeed. bcs of driver issue. >> if u done other printer please guide me. how to follow the procedure. I >> am new with bone. >> >> Thank you. >> chintan k. >> >> >> >> >> On Tue, Mar 4, 2014 at 9:51 PM, <[email protected]> wrote: >> >>> Hi Chintan >>> >>> Thks for the reply. I assume that when you say Linux, you mean Ubuntu >>> Linux 13.10? Since posting this question, I have switched to Ubuntu 13.04, >>> console only. I installed CUPS and it works fine. However I have not been >>> able to find drivers for my 2 printers, an HPLJ 1012 and a Lexmark S400. >>> For the HP, there was a semi compatible driver that I am using and that >>> lets me print from the BBB but I can't print from Windows. Workaround: I >>> print to a pdf file on the BBB. When that file gets created, a script is >>> triggered to print the file and move it into an archive directory. Works >>> fine. However I would love to find a driver for the USB connected Lexmark. >>> >>> Yves >>> >>> >>> On Monday, March 3, 2014 11:34:51 PM UTC-6, Chintan Kapadia wrote: >>>> >>>> Hello >>>> HPLIP is not available for angstrom...if u found CUPS. >>>> >>>> By the way I am using linux 13.10 on bbb using sdcard its work good. >>>> and easily getting Linux packages for printer or other.. why you not try >>>> this...? >>>> or if u successfully enable printer then share with me ur solution >>>> please. >>>> >>>> thnx >>>> chintan k. >>>> >>>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "BeagleBoard" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/beagleboard/3NokIpbeRRg/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/3NokIpbeRRg/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
