===INFO=== Cross Compiler: gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux Image used: Angstrom-TI-GNOME-image-eglibc-ipk-v2012.01-core-beagleboard-2012.01.11.img Beagleboard Kernel Repository: github <https://github.com/beagleboard/linux (remotes/origin/3.13)> Tried kernels from: kernel.org <https://www.kernel.org/pub/linux/kernel/> ==========
The Angstrom image does boot and network comes up right away. I Extracted config from uImage of Angstron. Merged config with omap2plus_defconfig using 'make olddefconfig'. Made sure 'Default kernel command string' had this line. (root=/dev/mmcblk0p2 rootwait console=ttyO2,115200) My process includes, make mrproper make olddefconfig make menuconfig # make sure CMDLINE was correct, and that SMSC95XX was enabled. make uImage -j4 LOADADDR=0x80008000 make modules make modules_install # I had all my environment variables exported. Install dir was directed to temporary directory. I then would copy uImage to /boot on the SD card and module directory to /lib/modules/ Results of kernel 3.0.101 from kernel.org: This one booted, however, the network never came up and the network device was never found. I believe one of the USB devices was not found. This one was successfully patched with patch-3.0.101-rt130.patch.xz from here <https://www.kernel.org/pub/linux/kernel/projects/rt/3.0/> Results of kernels from github.com: The only one which would successfully compile was 3.13. This one stopped at 'Starting kernel ...' I have already tried suggestions here <http://processors.wiki.ti.com/index.php/Kernel_-_Common_Problems_Booting_Linux#Problem_.231_-_No_more_output_is_seen_on_the_console_after_.22Starting_Kernel....22> . My only idea is the machine id is wrong, however I have no reference on how this is set or changed. I have looked for the settings suggested to enable the kernel to print its message about the kernel but some, it just did not exist, the one that it did exist did not print anything after 'Starting kernel'. The information at beagleboard.org <http://beagleboard.org/linux> does not work. Nothing there worked. I am looking for a missed step of over looked process. Thank you for your time. Durwin ===BOOT=== U-Boot SPL 2011.12-00006-gb1fd369 (Dec 30 2011 - 09:48:45) Texas Instruments Revision detection unimplemented OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2011.12-00006-gb1fd369 (Dec 30 2011 - 09:48:45) OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0 *** Warning - readenv() failed, using default environment In: serial Out: serial Err: serial Beagle xM Rev C No EEPROM on expansion board No EEPROM on expansion board Die ID #101000229ff80000016830c319017022 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 The user button is currently NOT pressed. SD/MMC found on device 0 reading uEnv.txt 13 bytes read Loaded environment from uEnv.txt Importing environment from mmc ... Loading file "/boot/uImage" from mmc device 0:2 (xxa2) 3372316 bytes read Booting from mmc ... ## Booting kernel from Legacy Image at 80200000 ... Image Name: Angstrom/3.0.14/beagleboard Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3372252 Bytes = 3.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. .---O---. | | .-. o o | | |-----.-----.-----.| | .----..-----.-----. | | | __ | ---'| '--.| .-'| | | | | | | | |--- || --'| | | ' | | | | '---'---'--'--'--. |-----''----''--' '-----'-'-'-' -' | '---' The Angstrom Distribution beagleboard ttyO2 Angstrom v2012.01-core - Kernel 3.0.14+ beagleboard login: root root@beagleboard:~# ifconfig eth0 Link encap:Ethernet HWaddr 0E:10:5A:0B:68:01 inet6 addr: fe80::c10:5aff:fe0b:6801/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1488 Metric:1 RX packets:21 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1458 (1.4 KiB) TX bytes:1138 (1.1 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@beagleboard:~# -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
