Hi Wulfman
No readme but I found these:
# USB Network Gate "eveusb" rules
# Copyright (C) 2013-2014 Eltima Software
# This file should be copied to /lib/udev/rules.d.
# In any conflict, the last rule wins.
# 'libusb' device nodes, see 50-udev-default.rules
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", OWNER="eveusb"
# eveusb.ko module
KERNEL=="eveusb", OWNER="eveusb"
********************************
Also this looks very interesting.
********************************
# eveusb - USB Network Gate daemon
#
# USB Network Gate allows you to share USB devices with remote computers
# and easily connect to shared devices at the remote side.
# This file should be copied to /lib/systemd/system.
[Unit]
Description=USB Network Gate daemon
After=local-fs.target
After=network.target
After=syslog.target
[Service]
# User=eveusb
# PermissionsStartOnly=true
# Type=forking
ExecStartPre=/sbin/modprobe eveusb
ExecStart=/opt/Eltima/eveusb/bin/eveusbd --process
ExecReload=/bin/kill -HUP $MAINPID
[Install]
WantedBy=multi-user.target
*********
And this
*********
# eveusb - USB Network Gate daemon
#
# USB Network Gate allows you to share USB devices with remote computers
# and easily connect to shared devices at the remote side.
# This file should be copied to /etc/init.
description "USB Network Gate daemon"
author "Eltima Software <[email protected]>"
start on runlevel [2345]
stop on runlevel [!2345]
#expect fork
#setuid eveusb
kill timeout 30
exec /opt/Eltima/eveusb/bin/eveusbd --process
pre-start script
modprobe eveusb
end script
************
I tried installing them as requested in the files. The one in /etc/init was
changed to be blank after reboot?
So I'm not sure what is going on?
On Sunday, 26 July 2015 15:36:48 UTC+1, Wulf Man wrote:
>
> cant change mode on a symlink
> whats in this file ?
> is it a shell script ?
> a compiled executable ?
>
>
>
>
>
> On 7/26/2015 7:31 AM, Ian Mellor wrote:
>
> Hi Peter,
>
> Thanks so much for you help.
>
> Here is what I'm getting with permissions. It looks like it has execute
> permissions?
>
>
> root@beaglebone:~/usr# dir
> bin share src
> root@beaglebone:~/usr# cd bin
> root@beaglebone:~/usr/bin# dir
> eveusbc eveusbd
> root@beaglebone:~/usr/bin# ls -l
> total 0
> lrwxrwxrwx 1 root root 30 Dec 5 2014 eveusbc ->
> /opt/Eltima/eveusb/bin/eveusbc
> lrwxrwxrwx 1 root root 30 Dec 5 2014 eveusbd ->
> /opt/Eltima/eveusb/bin/eveusbd
> root@beaglebone:~/usr/bin# .eveusbc
> -bash: .eveusbc: command not found
> root@beaglebone:~/usr/bin# chmod 777 eveusbc
> chmod: cannot operate on dangling symlink `eveusbc'
> root@beaglebone:~/usr/bin#
>
>
> On Sunday, 26 July 2015 14:54:27 UTC+1, Peter Baltus wrote:
>>
>> Hi Ian,
>>
>> Thanks for your email. Yes, it works more or less like in DOS, but there
>> are some differences:
>> - most Linux systems are configured such that root (as opposed to most
>> other users) does not by default execute files in the current directory.
>> This is for security reasons if I'm not mistaken. This can be bypassed by
>> typing the relative or full path to the command, such as ./eveusbc . Since
>> that doesn't work, it is worth looking into another important difference
>> with DOS:
>> - Linux systems have more extensive file permissions than the original
>> DOS system. It could be that the eveusbc file does not have "execute"
>> permission. You can check by 'ls -l', which shows the permissions in a
>> format such as rwxrw-r--. There are three groups, identifying permissions
>> for owner, group and world (from left to right). Each group can have
>> r(ead), w(rite) and execute permissions. To excluse any problems in this
>> area, you can give all permissions to everybody by 'chmod 777 eveusbc' and
>> then try again './eveusbc' .
>>
>> By the way, 'chmod 777' is not necessarily the best way to keep a
>> computer secure ;-) but it should help determine whether the problem is
>> related to permissions.
>>
>> Peter
>>
>> On Sunday, July 26, 2015 at 2:38:45 PM UTC+2, Ian Mellor wrote:
>>>
>>> Hi Peter,
>>>
>>> Yes I'm logged on as root but I'm in the directory where the file is.
>>> Does this not work the same as DOS?
>>> I tried typing ./eveusbc but I just get "No such fie or directory"
>>> I must say I'm lost.
>>>
>>> Any ideas?
>>>
>>> Thanks
>>>
>>> Ian
>>>
>>> On Sunday, 26 July 2015 09:11:10 UTC+1, Peter Baltus wrote:
>>>>
>>>> Try ./eveusbc
>>>> From the prompt it seems you are logged in as root and usually root
>>>> does not have the current directory in it's path for executing commands.
>>>>
>>>> Best regards,
>>>>
>>>> Peter
>>>
>>> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected] <javascript:>.
> For more options, visit https://groups.google.com/d/optout.
>
>
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
