see: https://groups.google.com/d/msg/beagleboard/IafeGW9q9nA/jQ60iyHjbAsJ
On Tue, Jul 28, 2015 at 11:49 AM, Durwin <[email protected]> wrote: > ===INFO=== > Cross Compiler: > gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux > Image used: > Angstrom-TI-GNOME-image-eglibc-ipk-v2012.01-core-beagleboard-2012.01.11.img > Beagleboard Kernel Repository: https://github.com/beagleboard/linux > (remotes/origin/3.13) > Tried kernels from: https://www.kernel.org/pub/linux/kernel/ > See "GOOD BOOT" below for more information > ========== > > The Angstrom image does boot and network comes up right away. > > I Extracted config from uImage of Angstrom. > Merged config with omap2plus_defconfig using 'make olddefconfig'. Made sure > 'Default kernel command string' had this line. > > (root=/dev/mmcblk0p2 rootwait console=ttyO2,115200) > > My build process includes, > > make mrproper # Then copied extracted config to .config > make olddefconfig > make menuconfig # make sure CMDLINE was correct, and that SMSC95XX was > enabled. > make uImage -j4 LOADADDR=0x80008000 > make modules > make modules_install # I had all my environment variables exported. > Install dir was directed to temporary directory. > > I then would copy uImage to /boot on the SD card and module directory to > /lib/modules/ > > Results of kernel 3.0.101 from kernel.org: > > This one booted, however, the network never came up and the network device > was never found. > This one was successfully patched with patch-3.0.101-rt130.patch.xz from > here > > Results of kernels from github.com: > > The only one which would successfully compile was 3.13. This one stopped at > 'Starting kernel ...' > I have already tried suggestions from HERE > > My only idea is the machine id is wrong, however I have no reference on how > this is set or changed. > I have looked for the settings suggested to enable the kernel to print its > message about the kernel > but with some kernels, it just did not exist, the one that it did exist did > not print anything after 'Starting kernel'. > > The information at http://beagleboard.org/linux does not work. Nothing > there worked. > > > ===GOOD BOOT=== > U-Boot SPL 2011.12-00006-gb1fd369 (Dec 30 2011 - 09:48:45) > Texas Instruments Revision detection unimplemented > OMAP SD/MMC: 0 > reading u-boot.img > reading u-boot.img > > > U-Boot 2011.12-00006-gb1fd369 (Dec 30 2011 - 09:48:45) > > OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz > OMAP3 Beagle board + LPDDR/NAND > I2C: ready > DRAM: 512 MiB > NAND: 0 MiB > MMC: OMAP SD/MMC: 0 > *** Warning - readenv() failed, using default environment > > In: serial > Out: serial > Err: serial > Beagle xM Rev C > No EEPROM on expansion board > No EEPROM on expansion board > Die ID #101000229ff80000016830c319017022 > Net: Net Initialization Skipped > No ethernet found. > Hit any key to stop autoboot: 0 > The user button is currently NOT pressed. > SD/MMC found on device 0 > reading uEnv.txt > > 13 bytes read > Loaded environment from uEnv.txt > Importing environment from mmc ... > Loading file "/boot/uImage" from mmc device 0:2 (xxa2) > 3372316 bytes read > Booting from mmc ... > ## Booting kernel from Legacy Image at 80200000 ... > Image Name: Angstrom/3.0.14/beagleboard > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 3372252 Bytes = 3.2 MiB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > Loading Kernel Image ... OK > OK > > Starting kernel ... > > Uncompressing Linux... done, booting the kernel. > > .---O---. > | | .-. o o > | | |-----.-----.-----.| | .----..-----.-----. > | | | __ | ---'| '--.| .-'| | | > | | | | | |--- || --'| | | ' | | | | > '---'---'--'--'--. |-----''----''--' '-----'-'-'-' > -' | > '---' > > The Angstrom Distribution beagleboard ttyO2 > > Angstrom v2012.01-core - Kernel 3.0.14+ > > beagleboard login: root > root@beagleboard:~# ifconfig > eth0 Link encap:Ethernet HWaddr 0E:10:5A:0B:68:01 > inet6 addr: fe80::c10:5aff:fe0b:6801/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1488 Metric:1 > RX packets:21 errors:0 dropped:0 overruns:0 frame:0 > TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:1458 (1.4 KiB) TX bytes:1138 (1.1 KiB) > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > root@beagleboard:~# > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
