Sounds like the perfect use case for a serial debug cable. No telling what is going on, until you get / use one.
On Wed, Jul 29, 2015 at 9:16 AM, Ben F. <[email protected]> wrote: > Hi, > > We have a project with many BBBs, therefore I need that modified kernel > mentioned above running on all BBBs. > Every BBB should be easyily "flashable" with one SSD with that modified > kernel. > > What I did/tried so far: > > 1.) build_kernel.sh > of the 4.1.3-bone-rt-r15 kernel. Some extras added (e.g. debugfs) --> No > errors > > 2.) Installed / copied the EMMC Flasher to my SSD > > wget > https://rcn-ee.com/rootfs/2015-07-08/flasher/BBB-eMMC-flasher-debian-8.1-console-armhf-2015-07-08-2gb.img.xz > --> The BeagleBone Black accepts the image and starts to flash (just for > testing) > > 3.) install_kernel.sh > Function works, it copies the content of the new kernel (e.g. > 4.1.3-bone-rt-r15-modules.tar.gz etc.) to the SSD. > > But the BBB does not flash with this modified SSD. Only the 4 User LEDs blink > up at all for a few seconds, then they are dark. After a few seconds they > blink up again. Seems that the BBB hangs at a point. > > Thanks in advance! > Greetings > Benjamin > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
