The site gives instructions on a debian distro. I am running Angstrom I cannot seem to find the script on my beaglebone at all.
Flashing eMMC To setup the standalone microSD image to automatically flash the eMMC on powerup. In /boot/uEnv.txt: ##enable BBB: eMMC Flasher: #cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh Change to: ##enable BBB: eMMC Flasher: cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh On Thursday, 30 July 2015 18:43:04 UTC+5:30, Gerald wrote: > > It is on the site you refereed to in your first post. > > *For testing, flasher and other Debian images, > see http://elinux.org/Beagleboard:BeagleBoneBlack_Debian > <http://elinux.org/Beagleboard:BeagleBoneBlack_Debian>* > > Gerald > > On Thu, Jul 30, 2015 at 8:05 AM, <[email protected] <javascript:>> > wrote: > >> Yes Mr.Gerald, I can boot from the eMMC and ssh into it. I just can't get >> it boot from the SD card. Thank you much for your help Mr.Gerald. If you >> could suggest any way that I can flash the eMMC directly with debian ? >> >> On Thursday, 30 July 2015 18:32:37 UTC+5:30, Gerald wrote: >>> >>> I understand the point of the post. I was trying to help make sure that >>> it could boot from the eMMC and that it was not corrupted as a response to >>> the second part of your post. >>> >>> >>> *Let us consider another case. The SD card is in, I just plug in my 5V >>> 2A cable and the power led glows. Shouldn't the BBB boot from the eMMC. But >>> that does not happen. Again the led's does not glow. How can I debug this?* >>> >>> That was the reason for my post. The SD card can prevent it from booting >>> form the SD card. >>> >>> Sorry if I missed your point of the post. >>> >>> Gerald >>> >>> >>> >>> >>> On Thu, Jul 30, 2015 at 7:58 AM, <[email protected]> wrote: >>> >>>> Yes, It does boot from the eMMC. The point of the post is that I want >>>> to boot from the sdcard and later flash my image onto the eMMC. >>>> >>>> On Thursday, 30 July 2015 18:25:55 UTC+5:30, Gerald wrote: >>>>> >>>>> Remove the SD card. >>>>> Plug in power. >>>>> It should boot from the eMMC. >>>>> >>>>> Gerald >>>>> >>>>> >>>>> >>>>> On Thu, Jul 30, 2015 at 7:37 AM, <[email protected]> wrote: >>>>> >>>>>> Dear all, >>>>>> I have obtained the latest debian image from the official site >>>>>> <http://beagleboard.org/latest-images>. I unpack the file and flash >>>>>> the .img to my SDCARD. I hold the boot button and insert my 5V,2A in. >>>>>> The >>>>>> beaglebone does not seem to start, only the power LED glows,USR0-3 do >>>>>> not >>>>>> glow. I cannot boot from the SD Card. >>>>>> >>>>>> Let us consider another case. >>>>>> The SD card is in, I just plug in my 5V 2A cable and the power led >>>>>> glows. Shouldn't the BBB boot from the eMMC. But that does not happen. >>>>>> Again the led's does not glow. How can I debug this? >>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "BeagleBoard" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> Gerald >>>>> >>>>> [email protected] >>>>> http://beagleboard.org/ >>>>> >>>> >>> >>> >>> -- >>> Gerald >>> >>> [email protected] >>> http://beagleboard.org/ >>> >> > > > -- > Gerald > > [email protected] <javascript:> > http://beagleboard.org/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
