Thx, but I'm working without overlay : #include
"am335x-bone-common-no-capemgr.dtsi"
So, I was wondering if putting :
fb {
compatible = "ti,am33xx-tilcdc";
reg = <0x4830e000 0x1000>;
interrupt-parent = <&intc>;
interrupts = <36>;
ti,hwmods = "lcdc";
ti,allow-non-reduced-blanking-modes;
*ti,allow-non-audio-modes;*
};
is enough ?
Le jeu. 30 juil. 2015 à 15:57, Robert Nelson <[email protected]> a
écrit :
> On Thu, Jul 30, 2015 at 8:14 AM, Micka <[email protected]> wrote:
> > Just to be sure, to disable the hdmi audio ( not the video ), is it
> enough ?
> > =>
> >
> > hdmi {
> > compatible = "ti,tilcdc,slave";
> > i2c = <&i2c0>;
> > pinctrl-names = "default", "off";
> > pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
> > pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
> > status = "okay";
> > };
> > fb {
> > compatible = "ti,am33xx-tilcdc";
> > reg = <0x4830e000 0x1000>;
> > interrupt-parent = <&intc>;
> > interrupts = <36>;
> > ti,hwmods = "lcdc";
> > ti,allow-non-reduced-blanking-modes;
> > ti,allow-non-audio-modes;
> > };
> >
>
> boot with:
>
> dtb=am335x-boneblack-nhdmi-overlay.dtb
>
> and hdmi (video) will still work..
>
> and then you can load the audio cape..
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> For more options, visit https://groups.google.com/d/optout.
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
