Also, I'm not sure if uboot is generic enough to detect both beagleboards, and beaglebones on the same image. If not . . . you may have to recompile uboot using these instructions: https://eewiki.net/display/linuxonarm/BeagleBoard#BeagleBoard-CopyKernelFiles
On Sat, Aug 1, 2015 at 7:22 AM, William Hermans <[email protected]> wrote: > I dont have an XM but . . . > > 3.14.39-ti-r61 3.8.13-bone70 4.1.0-rc1-x0-dirty > debian@xanbustester:~$ ls /boot/dtbs/3.8.13-bone70/ > am335x-bone.dtb omap2420-h4.dtb omap4-panda-es.dtb > am335x-boneblack.dtb *omap3-beagle-xm.dtb* omap4-panda.dtb > am335x-evm.dtb omap3-beagle.dtb omap4-sdp.dtb > am335x-evmsk.dtb omap3-evm.dtb omap4-var-som.dtb > am335x-tester.dtb omap3-tobi.dtb omap5-evm.dtb > arduino-tre.dtb omap4-panda-a4.dtb > > Would be my guess > > > On Sat, Aug 1, 2015 at 6:34 AM, Ubaid Qureshi < > [email protected]> wrote: > >> can any one tell me from where i must get the divers for beagle-board XM. >> Is driver for bone and XM are same? If yes then its not detecting my >> board what's the issue ? >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
