Thanks! > On Aug 2, 2015, at 13:02 , William Hermans <[email protected]> wrote: > > This post here, Jen S' post > > https://groups.google.com/forum/#!searchin/beagleboard/sdcard$20device$20tree/beagleboard/fOGeXCub9OY/lSNBcjpLvgkJ > > > On Sun, Aug 2, 2015 at 12:57 PM, William Hermans <[email protected]> wrote: > Rick, I forget the steps, but last year, or even before that someone on the > groups showed how to use the device tree compiler to decompile a blob file. > So if you have the dtb for Angstrom, it should be decompilable. > > The post in question was in relation to the sdcard operating in 2bit mode ? > versus 4bit. But maybe someone else here recalls how to decompile dt's using > the device tree compiler ? > > Then if you can not get your hands on a device tree compiler old enough. I do > have several images ( including original Angstrom- updated to 3.8.8 ) that > should do the trick. SO at minimum if i can remember how, and had the binary > file i could decompile it myself, and give you a pastebin link to the source. > > On Sun, Aug 2, 2015 at 12:51 PM, Rick Mann <[email protected]> wrote: > Thanks, William. > > Yeah, I saw that post. I've also emailed them for support. I could try to fix > it myself, but despite much time invested, I just don't "get" DTBs (and I've > written a lot of code on a lot of different platforms, and designed and built > boards around a lot of different MCUs). Their DTB source doesn't seem to be > available (I've asked for that, too), so I'd have to make one from scratch. > > They don't have a proper schematic that I can find, but they do show the GPIO > and ADC pins used > (https://docs.google.com/document/d/1XQtcoCa3WckPbJZpxYE6ueTVv-GCCfnqHIo7_dZ5UUs/edit, > page 4). This might be a good Cape for me to finally learn how to write an > overlay, but I feel completely helpless and don't even know where to begin. > > > On Aug 2, 2015, at 12:43 , William Hermans <[email protected]> wrote: > > > > Rick, have you read this yet ? > > http://inspire.logicsupply.com/2014/06/relay-cape.html > > > > Particularly the comments. Seems they are unconcerned with making it work > > with Debian. Which I would think would be fairly easy once one knows how to > > muck around in device tree blobs. But hey, I'm not the one trying to sell > > this product ;) > > > > Three options I can see, short of finding some one who has already "ported" > > the device tree to debian. > > > > 1). Ask for your money back. > > 2) Ask them to fix the problem. > > 3) Fix it yourself . . . > > > > It's been quite a while since the BBB's have been shipped with Angstrom. > > Yet they're still selling the product. Personally I think this is on them > > to fix. *If* they expect to capitalize on this product. But maybe > > reassigning a pin, or a few pins would be trivial for someone ? > > > > On Sun, Aug 2, 2015 at 12:20 PM, Rick Mann <[email protected]> wrote: > > I just got a Logic Supply Relay Cape, and I'm trying it out with a recent > > Debian. I put their supplied .dtbo file in /boot/dtbs/3.8.13-bone70. I > > disabled HDMI and tried to enable the cape, and I get this at boot: > > > > Uncompressing Linux... done, booting the kernel. > > [ 0.337870] omap2_mbox_probe: platform not supported > > [ 0.492868] tps65217-bl tps65217-bl: no platform data provided > > [ 0.577268] bone-capemgr bone_capemgr.9: slot #1: No cape found > > [ 0.614377] bone-capemgr bone_capemgr.9: slot #2: No cape found > > [ 0.651486] bone-capemgr bone_capemgr.9: slot #3: No cape found > > [ 0.669029] bone-capemgr bone_capemgr.9: slot #7: CBB-Relay conflict > > P8.26 (#0:CBB-Relay) > > [ 0.677638] bone-capemgr bone_capemgr.9: slot #7: Failed verification > > [ 0.684383] bone-capemgr bone_capemgr.9: loader: failed to load slot-7 > > CBB-Relay:00A0 (prio 0) > > [ 0.696333] bone-iio-helper CBB-Relay-ain.17: Could not get AIN1 analog > > input > > [ 0.708964] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' > > failed > > [ 0.772848] pinctrl-single 44e10800.pinmux: pin 44e10854 already > > requested by 44e10800.pinmux; cannot claim for gpio-leds.8 > > [ 0.784533] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status > > -22 > > [ 0.791815] pinctrl-single 44e10800.pinmux: could not request pin 21 on > > device pinctrl-single > > > > Clearly I'm missing something, and googling has turned up nothing on how to > > use it with debian. I also can't seem to find Logic Supply's github repo > > for it. > > > > Has anyone made this work with Debian? Thanks! > > > > > > -- > > Rick Mann > > [email protected] > > > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google Groups > > "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google Groups > > "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > > -- > Rick Mann > [email protected] > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout.
-- Rick Mann [email protected] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
