can you resolve your problem? On Thursday, April 16, 2015 at 10:54:59 AM UTC-5, [email protected] wrote: > > Hello, I acutally do not know a answere to your question, but I would like > to know how you got QNX running on the BBB. I followed the instructions in > the documentation and copied the MLO, uboot and bin file on a empty sd card > with fat32 but the board is not booting. Which instructions did you follow? > I'm a complete beginner with QNX and also BBB. > > Thanks Johannes > > On Thursday, October 2, 2014 at 5:34:57 PM UTC+2, [email protected] wrote: >> >> I am trying to get interrupts to work with my Beagle Bone Black in QNX >> Neutrino 6.6.0. Has anyone else been able to successfully do this? I am >> using GPIO1_29 as my input pin. I want to fire an interrupt on a rising >> edge. >> >> I have been able to verify my target is set up properly to read the input >> and can see the pin changing in my program. The problem is no matter what >> I do, the interrupt handler does not get called. I am unsure if I have set >> the pin up properly to trigger the interrupt or not. Does anyone have >> sample working code for generating interrupts? >> >> Thank you. >> >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
