Anyhow, this is the kernel's fault. Somehow it's different, and to be
honest I do not have the time or energy to mess with it.

On Fri, Aug 7, 2015 at 5:42 PM, William Hermans <[email protected]> wrote:

> By the way . . .
>
> william@xanbustester:~$ cat /etc/fstab
> # UNCONFIGURED FSTAB FOR BASE SYSTEM
> /dev/nfs / nfs defaults 0 0
> /dev/mmcblk0p1 /boot/uboot auto defaults 0 0
>
>
> On Fri, Aug 7, 2015 at 5:40 PM, William Hermans <[email protected]> wrote:
>
>> uEnv.txt
>>
>> bootdelay=1
>>
>> uname_r=4.2.0-rc4-bone2
>>
>> ipaddr=192.168.254.205
>> static_ip=192.168.254.205:192.168.254.162:192.168.254.254:255
>> .255.255.0:xanbustester
>> serverip=192.168.254.162
>> gatewayip=192.168.254.254
>> rootpath=/home/william/xanbus
>> optargs=ipv6.disable=1
>>
>> loadximage=load mmc 0:1 0x80300000 vmlinuz-${uname_r}
>> loadxfdt=load mmc 0:1 0x815f0000 /dtbs/${uname_r}/am335x-boneblack.dtb
>> loadall=run loadximage; run loadxfdt;
>>
>> netargs=setenv bootargs console=tty0 console=${console} ${optargs}
>> root=/dev/nfs nfsroot=${serverip}:${rootpath},vers=3 rw ip=${static_ip}
>> uenvcmd=setenv autoload no; run loadall; run netargs; bootz 0x80300000 -
>> 0x815f0000;
>>
>> Ok, so this works,. board boots fine - Everything is happy. But change
>> uname_r to uname_r=4.1.4-ti-r8.1 - It does not work. It leaves me in an
>> infinite boot loop. Can anyone spot anything I've missed ? I haven't run
>> depmod yet, but haven't had the chance . . .
>>
>> william@xanbustester:~$ ls /boot/uboot/
>> MLO                         config-4.1.4-ti-r8.1    u-boot.img
>> vmlinuz-4.1.4-ti-r8.1
>> System.map-4.1.4-ti-r8.1    config-4.2.0-rc4-bone2  uEnv.txt
>> vmlinuz-4.2.0-rc4-bone2
>> System.map-4.2.0-rc4-bone2  dtbs                    uEnv.txt.bak  zImage
>> william@xanbustester:~$ ls /boot/uboot/dtbs/
>> 4.1.4-ti-r8.1  4.2.0-rc4-bone2
>> william@xanbustester:~$ ls /boot/uboot/dtbs/4.1.4-ti-r8.1/
>> am335x-arduino-tre.dtb              am335x-boneblack-overlay.dtb
>> am335x-lxm.dtb           am43x-epos-evm.dtb
>> am335x-base0033.dtb                 am335x-boneblack-replicape.dtb
>> am335x-nano.dtb          am57xx-beagle-x15.dtb
>> am335x-bone.dtb                     am335x-boneblack-wl1835mod.dtb
>> am335x-pepper.dtb        am57xx-evm.dtb
>> am335x-boneblack-bbb-exp-c.dtb      am335x-boneblack.dtb
>> am437x-gp-evm-hdmi.dtb   dra7-evm.dtb
>> am335x-boneblack-bbb-exp-r.dtb      am335x-bonegreen.dtb
>> am437x-gp-evm.dtb        dra72-evm.dtb
>> am335x-boneblack-emmc-overlay.dtb   am335x-chiliboard.dtb
>> am437x-idk-evm.dtb       omap5-cm-t54.dtb
>> am335x-boneblack-hdmi-overlay.dtb   am335x-evm.dtb
>> am437x-sk-evm.dtb        omap5-sbc-t54.dtb
>> am335x-boneblack-nhdmi-overlay.dtb  am335x-evmsk.dtb
>> am43x-epos-evm-hdmi.dtb  omap5-uevm.dtb
>>
>>
>>
>>
>> --
>> For more options, visit http://beagleboard.org/discuss
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "BeagleBoard" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected].
>> For more options, visit https://groups.google.com/d/optout.
>>
>
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to