What board do you have? Gerald
On Sat, Aug 22, 2015 at 8:48 PM, Rick Mann <[email protected]> wrote: > In Figure 70, it shows the mechanical dimensions of the Cape, as well as > the locations of the mounting holes and headers P8 and P9. But it also > shows a set of 10 pins near the Ethernet jack notch. What are those > intended to be? > > There are also four test points (TP5 - 8) that I believe connect to the > PMIC. What are the mechanical locations of those relative to the Cape > origin, and what hole size are they? I'd like to add battery backup to my > Cape, and putting pins right through these would be easiest. > > Lastly, what are the positions of the console port pins relative to the > origin? It would be easier for me to pass those up through my Cape than to > try to connect to them with a Cape attached. > > BTW, I looked online for this information and couldn't find it via Google > searches. > > Thanks! > > -- > Rick Mann > [email protected] > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
