Hi Robert!

The Log output is:
<\n>U-Boot SPL 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06)<\r>
<\n><\n><\r>
<\n><\r>
U-Boot 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06), Build: 
jenkins-github_Bootloader-Builder-105<\n><\r>
<\n><\r>
       Watchdog enabled<\n><\r>
I2C:   ready<\n><\r>
DRAM:  512 MiB<\n><\r>
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1<\n><\r>
Using default environment<\n><\r>
<\n><\r>
Net:   <ethaddr> not set. Validating first E-fuse MAC<\n><\r>
cpsw<\n><\r>
Hit any key to stop autoboot:  1 <\b><\b><\b> 0 <\n><\r>
gpio: pin 53 (gpio 53) value is 1<\n><\r>
switch to partitions #0, OK<\n><\r>
mmc0 is current device<\n><\r>
gpio: pin 54 (gpio 54) value is 1<\n><\r>
Checking for: /uEnv.txt ...<\n><\r>
Checking for: /boot.scr ...<\n><\r>
Checking for: /boot/boot.scr ...<\n><\r>
Checking for: /boot/uEnv.txt ...<\n><\r>
gpio: pin 55 (gpio 55) value is 1<\n><\r>
817 bytes read in 22 ms (36.1 KiB/s)<\n><\r>
Loaded environment from /boot/uEnv.txt<\n><\r>
Checking if uname_r is set in /boot/uEnv.txt...<\n><\r>
gpio: pin 56 (gpio 56) value is 1<\n><\r>
Running uname_boot ...<\n><\r>
loading /boot/vmlinuz-3.8.13-bone70 ...<\n><\r>
5617184 bytes read in 336 ms (15.9 MiB/s)<\n><\r>
loading /boot/dtbs/3.8.13-bone70/am335x-boneblack.dtb ...<\n><\r>
26098 bytes read in 32 ms (795.9 KiB/s)<\n><\r>
loading /boot/initrd.img-3.8.13-bone70 ...<\n><\r>
2867214 bytes read in 184 ms (14.9 MiB/s)<\n><\r>
debug: [console=ttyO0,115200n8 
capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN 
root=UUID=319a7dc6-9ece-408a-877f-f7c38bebb825 ro rootfstype=ext4 rootwait 
fixrtc quiet init=/lib/systemd/systemd] ...<\n><\r>
debug: [bootz 0x82000000 0x88080000:2bc00e 0x88000000] ...<\n><\r>
Kernel image @ 0x82000000 [ 0x000000 - 0x55b620 ]<\n><\r>
## Flattened Device Tree blob at 88000000<\n><\r>
   Booting using the fdt blob at 0x88000000<\n><\r>
   Loading Ramdisk to 8fd43000, end 8ffff00e ... OK<\n><\r>
   Loading Device Tree to 8fd39000, end 8fd425f1 ... OK<\n><\r>
<\n><\r>
Starting kernel ...<\n><\r>
<\n><\r>
Uncompressing Linux... done, booting the kernel.<\r>
<\n>[    0.373011] omap2_mbox_probe: platform not supported<\r>
<\n>[    0.527892] tps65217-bl tps65217-bl: no platform data provided<\r>
<\n>[    0.591231] bone-capemgr bone_capemgr.9: slot #0: No cape found<\r>
<\n>[    0.628338] bone-capemgr bone_capemgr.9: slot #1: No cape found<\r>
<\n>[    0.665447] bone-capemgr bone_capemgr.9: slot #2: No cape found<\r>
<\n>[    0.702556] bone-capemgr bone_capemgr.9: slot #3: No cape found<\r>
<\n>[    0.721167] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' 
failed<\r>
<\n>[    0.782909] pinctrl-single 44e10800.pinmux: pin 44e10854 already 
requested by 44e10800.pinmux; cannot claim for gpio-leds.8<\r>
<\n>[    0.794575] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) 
status -22<\r>
<\n>[    0.801852] pinctrl-single 44e10800.pinmux: could not request pin 21 
on device pinctrl-single<\r>
<\n>Loading, please wait...<\r>
<\n>systemd-fsck[207]: rootfs: clean, 86289/233856 files, 569921/933632 
blocks<\r>
<\n>[    5.846980] libphy: PHY 4a101000.mdio:01 not found<\r>
<\n>[    5.852071] net eth0: phy 4a101000.mdio:01 not found on slave 1<\r>
<\n><\r>
<\n>Musik 7  musik ttyO0<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>172.17.17.2<\r>
<\n>The IP Address for eth0 is: 192.168.0.142<\r>
<\n>musik login:

Is there anything you can read?

Thank you!

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to