Pin mux 29 Авг 2015 г. 15:03 пользователь "Dileep D R" <[email protected]> написал:
> Hi, > > I am trying to enable MMC2 in U-boot. Below are my changes in U-boot > source. > > File: board.c > Function : cpu_mmc_init > Added : omap_mmc_init(2, 0, 0, -1, -1); > > File: mmc_host_def.h > Added : #define OMAP_HSMMC3_BASE 0x47810100 > > File: clock_am33xx.c > Function : enable_basic_clocks > Added : &cmper->mmc2clkctrl, ---> u32 *const clk_modules_explicit_en[]; > > when booted i am getting: > > U-Boot 2015.10-rc2-00179-g79c884d-dirty (Aug 29 2015 - 09:26:57 +0000) > > Watchdog enabled > I2C: ready > DRAM: 512 MiB > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1, OMAP SD/MMC: 2 > > *Card did not respond to voltage select! MMC init failed*Net: <ethaddr> > not set. Validating first E-fuse MAC > cpsw, usb_ether > Hit any key to stop autoboot: 0 > > > Regards, > Dileep > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
