typo mistake cleared. On Tuesday, September 1, 2015 at 5:31:55 PM UTC-7, peoliye wrote: > > > > On Tuesday, September 1, 2015 at 8:56:36 AM UTC-7, RobertCNelson wrote: >> >> On Tue, Sep 1, 2015 at 3:19 AM, peoliye <[email protected]> wrote: >> > Problem: I am getting "Warning: Neither atags nor dtb found" after i >> issue >> > below commands. >> > >> > # fatload mmc 0:1 0x80008000 zImage >> > # fatload mmc 0:1 0x81000000 omap3-beagle-xm.dtb >> > # bootz 0x80008000 - 0x81000000 >> >> Use the new defaults: >> >> # fatload mmc 0:1 0x82000000 zImage >> # fatload mmc 0:1 0x88000000 omap3-beagle-xm.dtb >> # bootz 0x82000000 - 0x88000000 >> > > Thanks but this also didn't work. Bootup gets stuck at "Starting kernel" > which is coming from bootloader > and after that there is no logs in console. > > I have the required UART3 driver compiled in my kernel and that is why i > get below logs when > i use below commands to boot but this doesn't load up the dtb. I use > uImage in below. > loaduimage=fatload mmc 0:1 0x80007fc0 uImage > loadfdt=fatload mmc 0:1 ${fdtaddr} omap3-beagle-xm.dts > mmcrootfstype=ext4 rootwait > > For full kernel logs: > http://pastebin.com/eK4si164 > > > > >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
