Hello to all, I'm prototyping a new cape board for BeagleBone Black. I have designed most of the circuit and now it's time to connect all the thing to the beaglebone. I have a problem: I can not figure out whitch PINs can I use. I read the BeagleBone Black System Reference Manual and the AM335x Sitara Processors datasheet, but I can't find where all the pin' s feature are explained. I some different kind of connection: - 1 I2C bus (it's OK, ill use P9 17 and 18 PINs) - 1 UART with CTS and RTS - 2 IRQ from push buttons - 4 analog channel (it's OK, ill use AINs PIN on P9)- 2 SPI bus - 3 PWM channel (standard PWM modulation, fixed frequency, variable duty cicle) - various I/O (no problem for this)
Until now I have always designed on less complex systems, like PIC24 and PIC18 based board. I know the hardware, but the AM3358 seems too big and complex, and I'm a bit scared of its. Please, can someone help me? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
