On 09/07/2015 02:14 PM, William Hermans wrote:
/CTRL + Z is job suspend in bash, probably dash also. If you are
connected via ssh to the BBB when you are ready to input the CTRL
+ Z, use CTRL + V, then CTRL + Z. This works with other CTRL
sequences in bash also, ala CTRL + J./
Not arguing against this point, but puTTY seems to just process ctrl +
z straight off. I had noticed in the far distant past that other
clients behave differently. Such as I think OpenSSH - which I have not
used in a long, long time.
On Mon, Sep 7, 2015 at 11:00 AM, Mike <[email protected]
<mailto:[email protected]>> wrote:
On 09/07/2015 01:06 PM, William Hermans wrote:
Sounds like you need to configure the ssh client you're using to
allow ctrl + z.
On Mon, Sep 7, 2015 at 2:46 AM,
<[email protected]
<mailto:[email protected]>> wrote:
Hi BBBers,
I've just got a Skywire modem cape for the BBB. I'm trying to
send an SMS. Everything goes well until I try to enter CTRL+Z
to end the SMS text entry and nothing happens. (I've done
this SMS send method from a PC before so I know the general
proceedure). I've tried Minicom on the BBB and Picocom. I've
tried it logging into the BBB via SSH terminal and via the
Cloud9 terminal. All fail to send the CTRL+Z character.
Anyone come across this before? Is there a terminal emulator
mode to set or such like?
I would direct connect to the BBB debug serial port to get a
terminal but the connector is not accessible with the cape
fitted - doh!
CTRL + Z is job suspend in bash, probably dash also. If you are
connected via ssh to the BBB when you are ready to input the CTRL
+ Z, use CTRL + V, then CTRL + Z. This works with other CTRL
sequences in bash also, ala CTRL + J.
Mike
mike@pride-n-joy:~$ ssh -V
OpenSSH_6.0p1 Debian-4+deb7u2, OpenSSL 1.0.1k 8 Jan 2015
mike@pride-n-joy:~$ ssh tightrope
mike@tightrope's password:
Linux tightrope 3.2.0-4-amd64 #1 SMP Debian 3.2.68-1+deb7u1 x86_64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
No mail.
Last login: Mon Sep 7 15:09:47 2015 from pride-n-joy.srv.localnet
mike@tightrope:~$ cat /dev/zero
^Z[1]+ Stopped cat /dev/zero
mike@tightrope:~$ fg
cat /dev/zero
^C
mike@tightrope:~$ ^Z
-bash: $'\032': command not found
mike@tightrope:~$ logout
Connection to tightrope closed.
mike@pride-n-joy:~$
I just setup and tried Putty also, same results...
The shell is catching these character combinations not the ssh client or
server. The ^Z shown on the command line above was entered as I noted
how to earlier.
Mike
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
