On Wed, Sep 9, 2015 at 12:52 PM, Phil Mills <[email protected]> wrote: > Robert, > > I'm not having success - the serial monitor continues to display "CCCCC" as > soon as it's powered up, so that seems to indicate that it's not finding > anything bootable on that SD card with the blank flasher image.
Yeah... "VirtualBox".... Just use 'win32imager" on the base *.img.xz with Windows 7... All the vm's are crap when it comes to writing to a microSD card.. > > My setup: 64-bit Debian Jessie (as VirtualBox VM on a Win7 host); > 2GB uSD card, freshly formatted & overwritten in a uSD->USB converter > (Virtualbox won't pass the built-in card reader on my laptop into the VMs) > 16GB uSD card, freshly formatted in a uSD->SD converter > Installed bmaptool ver3.2 via apt-get > Brought 2GB card over to VM > > mounted as /dev/sdd1; did "umount /dev/sdd1" to allow bmaptool to open w/ > exclusive access > Ran bmaptool as described above - no errors indicated. > Ejected uSD from VM image, host. > > Inserted 16GB uSD into Win7 system, > > copied 2015-03-01 debian 7.8 image > copied eeprom dump > created new job.txt file with contents as described above (UNIX line > endings) > ejected uSD from Win7 > > 2GB uSD into reader on BBB > 16GB uSD into USB adapter, then to USB on BBB > Serial cable connected > TP4 grounded to P8-1 > Power applied via mini-USB cable > "CCCCCCCC" > > Suggestions or troubleshooting steps? > I have erased/re-formatted/reloaded the cards 2x with same results. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
