Look down. Gerald
If you are interested in an *Altium* version, there is a version for the original A5B board they can be found at Altium A5B <https://github.com/CircuitCo/-BeagleBone-Black-RevA5/blob/master/BeagleBoardBlack_RevA5_Altium.zip?raw=true>. These files are provided *AS IS* with no support. If you are interested in an *Mentor* version of the A5C board they can be found at Mentor A5C <https://github.com/CircuitCo/-BeagleBone-Black-RevA5/blob/master/Mentor_BBB_A5C.zip?raw=true>. These files are provided *AS IS* with no support. Mentor has also recently released a PADS version of the board at PADS BeagleBone Black <http://www.pads.com/reference-designs/bb-bblk-000>. You can find the Solid Works and 3D PDF files provided AS-IS at 3D Models <https://github.com/lgxlogic> A GitHub repo is available with all revisions of the documentation - https://github.com/CircuitCo/BeagleBone-Black On Wed, Sep 9, 2015 at 1:18 PM, Aleix López <[email protected]> wrote: > Thank you Gerald but in this link only there are files for Orcad and > Allegro. > Are there these files for Altium? > > Thanks again, > Regards, > Aleix. > > > > > ___________________________________________ > > > > *Aleix López* > > *Mòbil: 699.92.96.83* > > *[email protected] <[email protected]>* > > > > *es.linkedin.com/pub/aleix-lopez/2b/2b6/ab7/* > <http://es.linkedin.com/pub/aleix-lopez/2b/2b6/ab7/> > > *https://twitter.com/AleixLopezAnton <https://twitter.com/AleixLopezAnton>* > > 2015-09-09 17:10 GMT+02:00 Gerald Coley <[email protected]>: > >> >> http://www.elinux.org/Beagleboard:BeagleBoneBlack#LATEST_PRODUCTION_FILES_.28C.29 >> >> Gerald >> >> On Wed, Sep 9, 2015 at 9:56 AM, <[email protected]> wrote: >> >>> Dear RBH, >>> >>> could you send me this files in Altium format? >>> >>> Thank you. >>> >>> Aleix. >>> [email protected] >>> >>> >>> >>> El dilluns, 25 juliol de 2011 8:11:35 UTC+2, RBH va escriure: >>>> >>>> Dear All, >>>> >>>> Dose anyone need Altium Designer Format of Beagle Board REV.C? >>>> >>>> Beagle board source files are designed by Cadence orcad and Allegero >>>> PCB. >>>> >>>> Due to expensive Cadence Tools limitation, it would be a good choice >>>> if project was imported into ALTIUM. >>>> >>>> I can provide Altium Designer Version for REV.C (sch, pcb, bom, >>>> gerber)...etc. Completely and flawlessly. >>>> >>>> Thanks! >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> Gerald >> >> [email protected] >> http://beagleboard.org/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/b54lwp30yDg/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- Gerald [email protected] http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
