Hi all,
is there any way to load MLO and u-boot *directly* from an USB
device? I have found
different answers searching the net. One people say, the boot order
can
be USB => UART => MMC => NAND (if user button is pressed or
resistors installed), others say, the ROM does not support USB boot.
What we want to do is a *fallback boot*. First, the board should try
from boot device A and if this fails due to to a hardware error, it
should
try booting from an alternative device.
What we *not* want to do is to boot MLO/u-boot from eMMC and later
load linux from USB. This way is easy and works, but it is not a
fallback solution.
Thanx for answers in advance
Carsten
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
