So the proper thing is “sudo shutdown now –h” ?
From: [email protected] [mailto:[email protected]] On Behalf Of Gerald Coley Sent: Wednesday, September 16, 2015 7:31 AM To: [email protected] Subject: Re: [beagleboard] Damage on power off? Shorting out pins on the processor due to improper power sequencing. When you pull the power, the PMIC cannot turn off th rails in the proper order because it runs out of power. Gerald On Wed, Sep 16, 2015 at 12:47 AM, Karl Karpfen <[email protected]> wrote: Hello, I got a new batch of BBBs from Circuitco. Amazingly they now come with a warning sticker on the Ethernet connector and a warning in the package to NOT to power off the board by unplugging the power supply because that could cause some damage. So my question: what kind of damage is meant here? Is it some damage on the used Linux installation or do we really talk about some hardware damage? If hardware: what could be damaged by powering the board off? Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- Gerald [email protected] http://beagleboard.org/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
