Sorry to ask, but is there a guide to load the las image into the board? Thanks!
On Fri, Sep 18, 2015 at 11:41 AM, Marcos Díaz < [email protected]> wrote: > Thanks a lot, I will test them and let you know. > > On Fri, Sep 18, 2015 at 11:35 AM, Robert Nelson <[email protected]> > wrote: > >> >> >> On Fri, Sep 18, 2015 at 9:25 AM, Marcos Díaz < >> [email protected]> wrote: >> >>> Hi, thanks for the answer, they do have different u-boot. I know that in >>> the A5C, for example, the cache is disabled in the u-boot by default, and >>> in the rev C is enabled, and i can see different versions of them. Is there >>> a u-boot that works the same for both boards? >>> >>> *This is from rev A5C: (rcn-ee: fails)* >>> U-Boot SPL 2013.04-dirty (Jul 10 2013 - 14:02:53) >>> >> >> >>> *This is from rev C: ** (rcn-ee: works)* >>> U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54) >>> >> >> Those are actually both old... I "think" you can grab the (2014.04) >> u-boot from this flasher: >> >> https://rcn-ee.com/rootfs/bb.org/release/2014-05-14/ >> >> But honestly, that's old too... I recommend you (after testing) flash >> this "console" image (it's the smallest) to both boards.. >> >> >> https://rcn-ee.com/rootfs/bb.org/testing/2015-09-13/console/BBB-eMMC-flasher-debian-8.2-console-armhf-2015-09-13-2gb.img.xz >> >> md5sum: 64de53c03df006f2cb6f95244871313e >> >> and you'll have u-boot: v2015.10-rc3 installed to the eMMC... >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > > > > -- > > ______________________________ > > <http://www.tallertechnologies.com> > > > Marcos Díaz > > Software Engineer > > > San Lorenzo 47, 3rd Floor, Office 5 > > Córdoba, Argentina > > > Phone: +54 351 4217888 / +54 351 4218211/ +54 351 7617452 > > Skype: markdiaz22 > > -- ______________________________ <http://www.tallertechnologies.com> Marcos Díaz Software Engineer San Lorenzo 47, 3rd Floor, Office 5 Córdoba, Argentina Phone: +54 351 4217888 / +54 351 4218211/ +54 351 7617452 Skype: markdiaz22 -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
