Hello Julian, I am having the same issue, could you let me know about the solution? Have you found some workaround to use BBB->SPI and ADS8528? Best regards Antonio
Em segunda-feira, 10 de março de 2014 07:15:25 UTC-3, Julian David Rath escreveu: > > Hi, > > I just found out that this is a better place to ask my question, it seams > like there is also a beaglebone Google group, little confusing. So here my > cross-post: > > I'd like to connect 4 ADS8528[0] daisy-chained via SPI to a BBB. I want to > test it in different iterations first I want to measure the 32 Analog input > channels captured by the ADS8528s with 1kHz and at the end with 200kHz. > Those ADS8528 using 4 SPI Channels in daisy-chain mode. So I did some > calculations on the needed bandwidth: > > for 1Khz: > 12Bit * 32Channels * 4KHz = 384 Kbit/s > > On 4 SPI Channels that means: > 12* 32*1Khz = 96 Kbit/s per SPI channel > > for 200Khz: > 12Bit * 32Channels * 200KHz = 76.8 Mbit/s = 9.6MByte/s > > On 4 SPI Channels that means: > 76.8Mb/s /4 = 19.2 Mbit/s per SPI channel > > Now 2 things: > * Should/Can I use the built-in SPI of the BBB or do I have to implement > 4 channels SPI bus by hand (High datarates PRUSS I guess)? > * Do you think the high datarates for the 200Khz are achievable? > > Thanks, > > /Julian > > [0]: http://www.ti.com/product/ads8528 > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
