> The only way I've seen this problem manifest its self is only when USB power > is not used. Our fix was ground VUSB to USB ground via a simple USB PCB > connector. e.g. we folded the support mount tabs into the pins on each side, > solder them, and then ran a mini usb to USB-A cable from the beaglebone, into > the connector.
A bit hacky, but until uio is back in the kernel, I suppose that will do. Thanks! > On Sep 23, 2015, at 15:24 , William Hermans <[email protected]> wrote: > > Pity. If I'm not using USB, do you know if the rebooting still happens? > > The only way I've seen this problem manifest its self is only when USB power > is not used. Our fix was ground VUSB to USB ground via a simple USB PCB > connector. e.g. we folded the support mount tabs into the pins on each side, > solder them, and then ran a mini usb to USB-A cable from the beaglebone, into > the connector. > > On Wed, Sep 23, 2015 at 3:18 PM, Rick Mann <[email protected]> wrote: > > > On Sep 23, 2015, at 10:48 , Robert Nelson <[email protected]> wrote: > > > > On Wed, Sep 23, 2015 at 12:43 PM, Rick Mann <[email protected]> wrote: > >> Thanks, Robert. That thread mentioned stability issues in r9 that you said > >> TI was working on. Do you know if they got addressed in r10? > > > > both r9/r10 contain the musb revert which had caused the rebooting in > > earlier v4.1.x kernels. > > Pity. If I'm not using USB, do you know if the rebooting still happens? > > > > >> And how/where do I report the UIO issues since r11? > >> > > > > I'd ping: Suman Anna <[email protected]> he's usually pretty busy, but > > he's the one at ti working on remoteproc/etc.. > > Thanks, done. > > > -- > Rick Mann > [email protected] > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- Rick Mann [email protected] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
