DId you guys have any luck? I need to get 250k working on a beaglebone black as well
On Friday, November 7, 2014 at 2:29:50 PM UTC-5, Stein Maerivoet wrote: > > Is it possible to change the baud rate of the UART to a custom value like > 100.000 bits/s? > In the datasheet of the AM335x Sitara the different modes are: > 2.4 Kbps > 9.6 Kbps > 19.2 Kbps > 38.4 Kbps > 57.6 Kbps > 115.2 Kbps > > But I read on this forum that they did set the baud rate to 500k. > https://groups.google.com/forum/#!topic/beagleboard/EEe7xAkCPkQ > > The library that I use (libbulldog) doens't support custom baudrates, and > this one makes use > of the termios.h (which also doesn't support other baudrates). > > Does anyone know how to change the baud rate to a custom value? I need > this because I want > to read a bus from a commercial product which works on 100.000 bits/s. > (SBus from Futaba). > > I am new to programming microcontrollers, so my knowledge of setting > registers etc. is limited. > > kind regards, > Stein > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
