[ 165.683866] pinctrl-single 44e10800.pinmux: pin 44e10850 already requested by rstctl.4; cannot claim for 48038000.mcasp
^ ^ On Sun, Oct 4, 2015 at 7:49 PM, Rick Mann <[email protected]> wrote: > I've got the current Debian/3.8 console build on an SD card, disabled HDMI > in and out, but I'm still running into some issue trying to load my > overlay. I'm not sure what's going on, exactly. My DTS ( > https://github.com/JetForMe/podtique/blob/v1/bbb/cape/Podtique1/BB-ENABLE-PRU.dts > ). > > [ 165.659756] bone-capemgr bone_capemgr.9: part_number 'BB-ENABLE-PRU', > version 'N/A' > [ 165.659841] bone-capemgr bone_capemgr.9: slot #7: generic override > [ 165.659858] bone-capemgr bone_capemgr.9: bone: Using override eeprom > data at slot 7 > [ 165.659875] bone-capemgr bone_capemgr.9: slot #7: 'Override Board > Name,00A0,Override Manuf,BB-ENABLE-PRU' > [ 165.659963] bone-capemgr bone_capemgr.9: slot #7: Requesting part > number/version based 'BB-ENABLE-PRU-00A0.dtbo > [ 165.659979] bone-capemgr bone_capemgr.9: slot #7: Requesting firmware > 'BB-ENABLE-PRU-00A0.dtbo' for board-name 'Override Board Name', version > '00A0' > [ 165.663169] bone-capemgr bone_capemgr.9: slot #7: dtbo > 'BB-ENABLE-PRU-00A0.dtbo' loaded; converting to live tree > [ 165.663554] bone-capemgr bone_capemgr.9: slot #7: #6 overlays > [ 165.669165] gpio-of-helper gpio_helper.11: could not find pctldev for > node /ocp/interrupt-controller@48200000, deferring probe > [ 165.669204] platform gpio_helper.11: Driver gpio-of-helper requests > probe deferral > [ 165.683866] pinctrl-single 44e10800.pinmux: pin 44e10850 already > requested by rstctl.4; cannot claim for 48038000.mcasp > [ 165.695265] pinctrl-single 44e10800.pinmux: pin-20 (48038000.mcasp) > status -22 > [ 165.702841] pinctrl-single 44e10800.pinmux: could not request pin 20 on > device pinctrl-single > [ 165.723660] davinci-mcasp 48038000.mcasp: pins are not configured from > the driver > [ 165.723999] gpio-of-helper gpio_helper.11: could not find pctldev for > node /ocp/interrupt-controller@48200000, deferring probe > [ 165.724029] platform gpio_helper.11: Driver gpio-of-helper requests > probe deferral > [ 165.725584] gpio-of-helper gpio_helper.11: could not find pctldev for > node /ocp/interrupt-controller@48200000, deferring probe > [ 165.725615] platform gpio_helper.11: Driver gpio-of-helper requests > probe deferral > [ 165.726787] gpio-of-helper gpio_helper.11: could not find pctldev for > node /ocp/interrupt-controller@48200000, deferring probe > [ 165.726816] platform gpio_helper.11: Driver gpio-of-helper requests > probe deferral > [ 165.742052] omap_hwmod: pruss: failed to hardreset > [ 165.759241] bone-capemgr bone_capemgr.9: slot #7: Applied #6 overlays. > [ 165.786484] pruss_uio 4a300000.pruss: pins are not configured from the > driver > [ 165.794415] gpio-of-helper gpio_helper.11: could not find pctldev for > node /ocp/interrupt-controller@48200000, deferring probe > [ 165.794452] platform gpio_helper.11: Driver gpio-of-helper requests > probe deferral > > > > > > > -- > Rick Mann > [email protected] > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
