#1 No, the module is already compiled for the image. #2 No, this is continuous mode with all 7 configurable channels running( 8 including AIN7 ), and just blasting the data to screen. No ordering, not checking anything. There are many *MANY* redundant reads.
Right now I am experimenting with mmap(). Using mmap() I am able to configure, and read from the ADC without loading that module, or configuring the ADC channels using the iio userspace driver. What this nets me is not having to run an interrupt related to the driver ( I'm guessing ). Which *could* slow things down tremendously. Also, just now I'm toying with sample averaging turned off. Anyway, this is all new to me, so much experimentation will be needed on my part to figure this all out. With that said, I'm about ready for a break for a little while. Maybe and hour or two, or maybe a day or two . . . heh Helps keep me from getting burnt out. . . -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
