I've found that 2 LEDs, or any number of LEDS on, and stuck on after a boot is a uEnv.txt configuration error. Anyway you can show us your uEnv.txt file contents ?
Also it would be good to get the output from the serial debug port. On Thu, Oct 8, 2015 at 1:25 PM, Robert Nelson <[email protected]> wrote: > On Thu, Oct 8, 2015 at 3:06 PM, Christopher Stack <[email protected]> > wrote: > > Let me know if I need to put this in a new thread, or if someone wants to > > take off the group entirely. > > > > I followed the directions here: > > > https://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-Bootloader:U-Boot > . > > Specifically this section: Bootloader: U-Boot and the bootloader portion > of > > Setup microSD card. > > > > After following those directions the Beagle Bone fails to boot, leaving 2 > > LEDS on and messages on UART0 saying that there is no partition table. > > > > I see the next step in Setup microSD card is creating the partition > table, > > but that doesn't seem to be working it complains that the device is > > currently busy. I'd prefer not to blow away the operating system if > that's > > possible? Just to see what happened I forced the sfdisk command and it > > seemed to create 4 partitions, only one of which had a size which seems > > right to me. When i rebooted though I get an error that says bad device > mmc > > 1. > > busy? odd as you just blew out the partition table in the step before... > > I'm guessing... Virtual Machine??? > > or an evil auto-mounter... > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
