Thanks Robert,
BB-UART4-00A0.dtbo is present in /lib/firmware. I’ve not had an issue before but this is a freshly flashed Jessie BBB. dmesg shows the following which is the same error as per the first post when echoing into the slots. [ 4.968908] __of_adjust_tree_phandle_references: Could not find target property 'fixup' @/__local_f ixups__ [ 4.979738] bone_capemgr bone_capemgr: slot #4: Failed to resolve tree [ 4.987236] bone_capemgr bone_capemgr: loader: failed to load slot-4 BB-UART4:00A0 (prio 0) On Tue, Oct 13, 2015 at 4:06 PM, Robert Nelson <[email protected]> wrote: > On Tue, Oct 13, 2015 at 10:01 AM, Lee Armstrong <[email protected]> wrote: >> Thanks Robert, >> >> I am simply trying to enable UART4 which I didn’t think needed anything >> disabling though? > in /boot/uEnv.txt > cape_enable=bone_capemgr.enable_partno=BB-UART4 > and reboot. ;) > (this is assuming /lib/firmware/BB-UART4-00A0.dtbo is installed) > Regards, > -- > Robert Nelson > https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
