On Thu, Oct 22, 2015 at 5:12 AM, Mourad Elamra. <[email protected]> wrote:
> Hi,
> i´m using two BeagblBoard with my PC. i need to connected with USB. but
> everyone hav a USB Ip Address= 192.168.7.2
>
> how can i change the static Ip Address from one Board ?
>
Hi Mourad,
Depending on how old your root file system is:
cat /etc/dogtab
we recently added a script: /opt/scripts/boot/autoconfigure_usb0.sh
So in /etc/network/interfaces
You just need to change the *7* to *8* or (anything 1-255)
# Ethernet/RNDIS gadget (g_ether)
# Used by: /opt/scripts/boot/autoconfigure_usb0.sh
iface usb0 inet static
address 192.168.7.2
netmask 255.255.255.252
network 192.168.7.0
gateway 192.168.7.1
and on the next reboot,
/opt/scripts/boot/autoconfigure_usb0.sh
makes sure it's setup correctly..
Regards,
--
Robert Nelson
https://rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
