Honestly, I've bought several from various places (Digikey, Adafruit, Sparkfun, etc).
Who is "we?" > On Oct 26, 2015, at 19:00 , Gerald Coley <[email protected]> wrote: > > Well, if you bought it from Element 14, well, I am not sure they can save the > eMMC. We can. But, you bought it from Element 14 so you need to ask them what > they are capable of doing. > > Gerald > > > On Mon, Oct 26, 2015 at 7:38 PM, Rick Mann <[email protected]> wrote: > Thanks, Gerald, that's awesome. I'll try that. > > Erm...where do I send the request? Element 14? > > > On Oct 26, 2015, at 17:32 , Gerald Coley <[email protected]> wrote: > > > > Just request an RMA. Note that you want to save the eMMC contents. They > > should be able to handle that. There is no need to replace the eMMC. They > > just need to be sure and not re-flash it. > > > > Gerald > > > > > > On Mon, Oct 26, 2015 at 5:12 PM, <[email protected]> wrote: > > If the goal is to recover data, it might be easier to get the eMMC mounted > > on > > an adapter board (instead of risking another BeagleBone) so it can be read > > from a PC or another card reader. > > > > Or for the really adventureous - remove the eMMC and do a dead wiring to a > > disassembled uSD to SD adapter. Only caveat is this is probally riskier as > > far > > as data is concerned. > > > > On Sunday, October 25, 2015 07:36:20 Graham wrote: > > > I would think that your best bet (not the cheapest solution, but most > > > likely to yield results fast), is to buy another good BBB, then give that > > > new one and the bad one to someone that has BGA rework and re-balling > > > capability, and move the eMMC from the bad one to the new one. If the old > > > eMMC survived the "event", then it should come up immediately. > > > I don't know if you could ask CircuitCo to do that for you. > > > > > > Since you can buy a new BBB for the price of one-half-hour of repair shop > > > time, I doubt if it is worth recovering the rest of the abused BBB > > > hardware, for anything other than very simple repairs. > > > > > > --- Graham > > > > > > == > > > > > > On Sunday, October 25, 2015 at 4:33:07 AM UTC-5, Rick M wrote: > > > > Like a complete asshole, I let bare solder wire drag over my powered > > > > board. It's dead. > > > > > > > > Is there any hope of getting it repaired, so that I may get at the > > > > contents of the eMMC? It holds a lot of my work the past month trying to > > > > get all my sh*t working with any 4.x kernel. I hate to start, well, not > > > > from scratch, but not have the record of where I left things. > > > > -- > > Hunyue Yau > > http://www.hy-research.com/ > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google Groups > > "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > > > > > > > -- > > Gerald > > > > [email protected] > > http://beagleboard.org/ > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google Groups > > "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to [email protected]. > > For more options, visit https://groups.google.com/d/optout. > > > -- > Rick Mann > [email protected] > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > > > > -- > Gerald > > [email protected] > http://beagleboard.org/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- Rick Mann [email protected] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
